พุคเหล็ก 3/8" รุ่น EB-04-B (80ชิ้น/กล่อง) FIX-XY
พุคเหล็ก 3/8" รุ่น EB-04-B (80ชิ้น/กล่อง) FIX-XY
คุณสมบัติเด่น
ผลิตจากเหล็กเกรดดี สามารถใช้งานร่วมกับสว่าน ค้อน ใช้ยึดกับผนังปูน เมื่อต้องการยึดกับสิ่งของที่มีน้ำหนักมาก หรืออะไรที่เสี่งต่อการเกิดอันตรายต่อผู้อื่น
คุณสมบัติทั่วไป
ใช้กับดอกสว่านเจาะปูนขนาด 3/8 นิ้ว มีความสามารถในการรับแรงดึงและแรงเฉือนได้พอสมควร ใช้กับงานคอนกรีตทั่วไป สามารถใช้ได้ทั้งในร่มและกลางแจ้ง
รายละเอียดสินค้า
พุคเหล็ก ใช้สำหรับยึดกับผนังปูน เมื่อต้องการใช้ยึดกับสิ่งของที่มีน้ำหนักมาก พุคเหล็ก 1 ชุด ประกอบด้วย สกรู,ปลอกพุค,แหวนอีแปะ และหัวน็อต
ข้อควรระวังในการใช้งาน
- ต้องเจาะรูไม่ใหญ่กว่าตัวพุคมากเกินไป ตอนทํามาร์คเพื่อเจาะรูคอนกรีตนั้น ตอนเจาะต้องเจาะให้ตรงเพราะในกรณีที่เจาะยึดหลายตัวนั้น ถ้าเจาะรูไม่ตรงหรือคลาดเคลื่อนจะทําให้ตอนติดตั้งลําบากเพราะรูบนวัตถุที่จะยึดไม่ตรงกับแกนพุ๊กที่ยื่นออกมา จะทําให้ติดตั้งไม่ได้ บางครั้งต้องทุบแกนพุ๊กให้แกนตรงก่อนถึงจะยึดได้ แต่ก็ทําให้การยึดพุ๊กไม่แน่น- การขันหัวน็อตตัวเมียมากเกินไปจนทําให้ปลอกพุ๊กโผล่ยื่นเลยจากแกนพุ๊ก ทําให้ปลายปลอกพุ๊กหุบลง ทําให้การยึดเกาะของพุ๊กลดลงมากจนอาจทําให้พุ๊กคลอนจนหลุดได้ เมื่อได้รับแรงดึงเพียงเล็กน้อย- การยึดเกาะบริเวณขอบคอนกรีตหรือคอนกรีตที่ไม่แข็งแรง หรือคอนกรีตเก่า โดนไฟไหม้ เมื่อติดตั้งอาจทําให้เกิดความเครียดรอบตัวพุ๊ก คอนกรีตจะปริแตกได้
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c Steel anchor 3/8" model EB-04-B (80 pieces/box) FIX-XY
Features
Made from good grade steel Can be used with drills, hammers, used to fix on cement walls When you want to attach to heavy objects or anything that poses a risk of harm to others
general properties
Use with 3/8 inch masonry drill bits, capable of receiving moderate tensile and shear forces. Used for general concrete work. Can be used both indoor and outdoor
product details
Steel anchors are used for fixing on concrete walls. When using to attach to heavy objects, 1 set of steel anchors consists of screws, anchor sleeves, flat washers and nut heads.
Precautions for use
- Must drill a hole not too big than the Puck When making a mark to drill a hole in that concrete When drilling, it must be drilled straight because in the case of multiple mounting holes If the hole is not straightor inaccuracy will make installation difficult because the hole on the object to be fixed does not match the protruding plug axis will make it impossible to install, sometimesyou have to hit the plug shaft to straighten the shaft before it can be fixed But it makes the anchor fastening not tight.- Over tightening of the female nut until the bushing protrudes from the bushing. Causing the end of the plug cap to close down make adhesionPuk's stuff is reduced so much that it may cause the puk to come loose. with a slight pull- Adhesion to concrete or weak concrete edges or old concrete burnt when installing may cause stressaround the anchor, the concrete may crack.
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c