หน้ากากซิลิโคนครึ่งหน้า รุ่น 6001 YAMADA

Features

• The silicone mask is made from premium grade silicone.not irritatedSoft and comfortable throughout wearing.and resistant to chemicalsDesigned with silicone as a 2-layer flange, perfectly attached, fits snugly to the face of the wearer, there is no air leakage.
• Breathe easily with dual cartridges, well balanced, lightweight, easy to connect, sealed, no gaps.with the jaw lock systemIncrease safety while wearingventilation valvewith extra widthIt helps to breathe easily.Reduce heat and humidity inside the mask.Easy to clean, designed to exhale from the bottom.Helps reduce fogging if used with a visor or glasses.
• Straps and Locking ClipsMade from quality grade materialsConcise with every face shape.The mask can be adjusted up and down without having to remove it

product details

Silicone Half Face Mask Model 421

material

installation

wearing a mask

1. Place the mask over your nose and mouth and put on the headband.
2. Pull the band under your head to your neck.
3. Adjust the silicone mask to the area under the nose for wider vision.
4. Adjust the headband to fit the mask.If the mask does not fit the face

1. Turn the arrow symbols on the mask and filter towards each other.
2. Turn clockwise until it locks into place.

Precautions for use

• This respirator will reduce the hazard level from airborne contaminants.If it is used incorrectly or in the wrong wayIt can be life threatening.Therefore, before useUsers must read and understand the limitation instructions.and proper use of the product in detailfor the most efficient use
• Respiratory protection devices are effective when used correctly.It should be worn during exposure to chemicals that are harmful to the respiratory system.
• Should not be used in burning, cutting or welding applications.
• It should not be used to prevent chips from blasting, grinding or polishing and other harsh impacts.
• when scratched or damagedWill reduce visibility and impact resistance, so always check and clean.And change immediately if the glasses are damaged.

• This respiratory protective device is not a breathing air supply type.and should not be used in confined spaces or where the oxygen content is less than 17%
• Do not use this device if it is not possible to determine the type and concentration of the airborne contaminant.
• Do not modify, modify or repair this device.
• The face area should not have any obstructions between the mask and the face such as beard, hair, etc.
• Cannot be used to escape (fire)
• Immediately leave the operating area and replace with a new respiratory protection device.If checking, the following errors are found: 1. Found that the equipment is damaged, such as damaged parts, missing parts.Stretched head strap, etc. 2. If you feel short of breath, uncomfortable. 3. Feel dizzy or unusual. 4. If you feel that you have a car or smell or irritation.
• Stored under sealed packaging and away from airborne hazardous substances areas.
• The wearer must wear the mask properly, take care of it and maintain it according to the RPE, which will make the mask effective protection against toxins.

• unpack the partsof equipment separated
• Clean and disinfect the mask.(filter cartridge not included) by the tea in warm water cleaned with soap.Scrub with a soft brush.
• Sterilized with ammonium solution.sodium hypochloriteor other disinfectants
• Wash with warm clean water.and blow drywhich must be in a sterile place, the temperature used for cleaning should not exceed 50 degrees

• PVC lenses have anti-scratch coating. But if you avoid the use of acetone, methyl ethyl ketone, toluene, methylene chloride and other strong solvents, it should be stored in a dry place. In the temperature range of -10 to 40 degrees and at less than 70% relative humidity.