Sikalastic® U-Coating วัสดุกันซึมหลังคาประเภทโพลียูรีเทน สำหรับชั้นทับหน้า (ท๊อปโคท) แห้งเร็ว
Sikalastic® U-Coatingวัสดุกันซึมหลังคาประเภทโพลียูรีเทน สำหรับชั้นทับหน้า (ท๊อปโคท) แห้งเร็วSikalastic® U-Coating เป็นวัสดุกันซึมหลังคาประเภทโพลียูรีเทน ชนิดสองส่วนผสม แห้งเร็ว สำหรับใช้ทาเป็นกันซึมหลังคาชั้นท๊อปโค้ท ซึ่งเป็นส่วนหนึ่งของระบบกันซึมหลังคา SikaRoof® MTC-05/-08/-10 UV AP และสามารถทาทับกันซึมชนิดทาเคลือบประเภทอะโรมาติก โพลียูรีเทน 1 หรือ 2 ส่วนผสมได้
- สามารถใช้งานได้ง่ายและทาทับได้ดี
- บ่มและแห้งตัวที่อุณหภูมิต่ำ (-5 °C)
- สามารถทาเคลือบ ติดตั้งได้โดยไม่ต้องใช้ความร้อนหรือเปลวไฟ
การใช้งาน
- ใช้สำหรับงานกันซึมหลังคาภายนอกอาคาร สำหรับงานก่อสร้างใหม่หรืองานปรับปรุงหลังคา
- ใช้เป็นชั้นท๊อปโค้ท สำหรับกันซึมประเภทอะโรมาติกโพลียูรีเทน
- ใช้เป็นชั้นท๊อปโค้ท สำหรับระบบกันซึมหลังคาในกลุ่ม Sikalastic®
คุณลักษณะ/คุณประโยชน์
- สามารถใช้งานได้ง่ายและทาทับได้ดี
- บ่มและแห้งตัวที่อุณหภูมิต่ำ (-5 °C)
- สามารถทาเคลือบ ติดตั้งได้โดยไม่ต้องใช้ความร้อนหรือเปลวไฟ
- สามารถทาทับได้ โดยไม่จำเป็นต้องลอกของเก่าออก
- เป็นวัสดุกันซึมชนิดไร้รอยต่อ
บรรจุภัณฑ์ส่วนประกอบ A 13.3 กก.ส่วนประกอบ B 2.7 กก.ลักษณะของสินค้า/สีลักษณะ มันเงาสี สีขาว สีเทา
*สีอื่นสามารถสั่งได้
สีที่เลือกจากแผ่นเทียบสีนั้นเป็นการเทียบเคียง สำหรับการจับคู่สี ใช้สีตัวอย่างและยืนยันสีที่เลือกภายใต้สภาพแสงจริง เมื่อผลิตภัณฑ์โดนแสงแดดโดยตรง อาจเกิดสีซีดหรือสีเปลี่ยน ซึ่งไม่มีผลต่อการใช้งานและประสิทธิภาพของน้ำยาเคลือบข้อมูลผลิตภัณฑ์ ส่วนประกอบหลักทางเคมี : อะลิฟาติกโพลียูรีเทนอายุผลิตภัณฑ์ : 12 เดือน นับจากวันที่ผลิตในบรรจุภัณฑ์ หากจัดเก็บอย่างถูกวิธี ภายในบรรจุภัณฑ์ที่ปิดสนิท และไม่เสียหายการเก็บรักษา : จัดเก็บในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหาย บริเวณที่แห้งและไม่โดนแสงแดดโดยตรง ภายใต้อุณหภูมิระหว่าง +10 °C ถึง +25 °Cความหนาแน่น : ~ 1.2 กรัม / ลูกบาศก์เซนติเมตรข้อมูลการใช้งานอัตราส่วนผสม : ส่วนประกอบ A : ส่วนประกอบ B = 10 : 2 (โดยน้ำหนัก)อุณหภูมิของผลิตภัณฑ์ : ต่ำสุด +10°Cอุณหภูมิแวดล้อม : ต่ำสุด -5°C / สูงสุด +40°Cค่าความชื้นสัมพันธ์ : สูงสุด 85%จุดน้ำค้าง : ให้ระวังการเกิดการควบแน่นพื้นผิวและฟิล์มที่ยังไม่แข็งตัวจะต้องมีอุณหภูมิที่สูงกว่าอุณหภูมิจุดน้ำค้างอย่างน้อย 3°Cความชื้นของผิว : ≤ 4% สัดส่วนโดยน้ำหนัก วิธีการทดสอบ: มิเตอร์วัดความชื้น Sika® -Tramax, CM หรือ การวัดโดยใช้วิธี Oven-dry-method ต้องไม่มีความชื้นขึ้นสะสม (rising moisture) เมื่อคลุมด้วยแผ่นพลาสติก ตามมาตรฐาน ASTM (Polyethylene-sheet) ต้องไม่มีน้ำ ความชื้น การควบแน่นบนพื้นผิวระยะเวลาการใช้งานหลังผสม
อุณหภูมิ |
ระยะเวลา |
+ 10°C |
~ 7 ชั่วโมง |
+ 20°C |
~ 5 ชั่วโมง |
+ 30°C |
~ 3 ชั่วโมง |
+ 40°C |
~ 2 ชั่วโมง |
ขั้นตอนการใช้งานข้อแนะนำสำหรับเครื่องมือและอุปกรณ์
เลือกอุปกรณ์ที่เหมาะสมที่สุด สำหรับการทำงาน
อุปกรณ์การผสม
- เครื่องผสมไฟฟ้ารอบต่ำ (300 – 400 รอบต่อนาที)
อุปกรณ์การทำงาน
- แปรง หรือลูกกลิ้งที่ทนต่อสารละลาย
- เครื่องพ่นไร้อากาศ หัวฉีดขนาด 1.0 – 1.5 มม.
แรงดันประมาณ 0.3-0.4 MPa
- เครื่องพ่นไร้อากาศ หัวฉีดขนาด 0.44 – 0.49 มม.
แรงดันประมาณ 20 MPa การเตรียมพื้นผิว : หากระยะเวลารอการเคลือบของชั้นเบสโคทเกินจากที่กำหนด ให้ขัดพื้นผิวด้วยเครื่องมือทางกลให้ผิวหยาบเล็กน้อย ก่อนเคลือบวัสดุ ชั้นถัดไป ทำความสะอาดพื้นผิวให้สะอาด ปราศจากฝุ่น และเศษวัสดุ ที่อาจส่งผลต่อการเคลือบผิวชั้นสุดท้ายและประสทธิภาพการยึดเกาะ โดยใช้เครื่องดูดสูญญากาศการผสม : ปั่นส่วนประกอบ A (เรซิ่น) ด้วยสว่านความเร็วรอบต่ำจนสีและส่วนผสม เข้ากันและเนียนเป็นสีเดียวกัน เติมส่วนประกอบ B (ฮาร์ดเดนเนอร์) ลงไปในส่วนประกอบ A กวนต่อไปอีกประมาณ 3 นาที จนกระทั่งได้ ส่วนผสมที่เนียนเป็นเนื้อเดียวกัน แนะนำให้ผสม Sikalastic® U-Coating ทั้งชุดในครั้งเดียว ระยะเวลาในการปั่น A+B คือ 3 นาที การใช้งาน : ทาหรือพ่น Sikalastic® U-Coating ด้วยลูกกลิ้ง แปรง ด้วยเครื่องพ่น เพื่อให้ได้ความหนาที่สม่ำเสมอ และได้ผิวหน้าที่เรียบและสวยการทำความสะอาดเครื่องมือและอุปกรณ์ : ทำความสะอาดเครื่องมือทุกชนิด และอุปกรณ์ต่าง ๆ ด้วย Thinner C ทันทีหลังการใช้งาน หากพบวัสดุแข็งติดอยู่กับเครื่องมือหรืออุปกรณ์ ต้องกำจัดโดยใช้เครื่องมือทางกลเท่านั้น

Sikalastic® U-CoatingPolyurethane fast drying topcoat for roof waterproofingSikalastic® U-Coating is a 2-part, polyurethane, fast drying top coat for roof waterproofing. Part of the SikaRoof® MTC-05/-08/-10 UV AP System and can be used to overcoat different 1- or 2-part aromatic polyurethane base coats.
- Good workability and recoating properties
- Cures at low temperatures (-5 °C)
- Cold applied - requires no heat or flame
Usage
- On fully exposed new construction or refurbished flat roofs
- Top coat over aromatic polyurethane base coats
- Top coat of Sikalastic® roof waterproofing or coating systems
Advantages
- Good workability and recoating properties
- Cures at low temperatures (-5 °C)
- Cold applied - requires no heat or flame
- Easily recoated – no removal required
- Seamless coating
Packaging Part A 13,3 kgPart B 2,7 kgRefer to current price list for packaging variations.Colour Appearance GlossColour White, Grey*Other colours on request.Applied colours selected from colour charts will be approximate. For colour matching: Apply colour sample and confirm selected colour under real lighting conditions.When product is exposed to direct sunlight, there may be some discolouration and colour variation, this has no influence on the function and performance of the coating.Product InformationComposition : Aliphatic polyurethaneShelf life : 12 months from date of production.Storage conditions : The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +10 °C and +25 °C. Always refer to packaging.Density : ~1,2 g/cm3Application Information Mixing ratio : Part A : Part B = 10 : 2 (by weight) Product temperature : 10 °C min.Ambient air temperature : -5 °C min. / +40 °C max.Relative air humidity : 85 % max.Dew point : Beware of condensation.The substrate and uncured applied floor material must be at least +3 °C above dew point.Substrate moisture content : ≤ 4 % parts by weightTest method: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).No water / moisture / condensation on the substrate.
Pot Life
Temperature |
Time |
+10 °C |
~7 hours |
+20 °C |
~5 hours |
+30 °C |
~3 hours |
+40 °C |
~2 hours |
Application steps EQUIPMENT
Select the most appropriate equipment required for the project:
Mixing
- Electric single paddle mixer (300–400 rpm)
Application
- Brush or solvent resistant rollers
- Air spray with machines: nozzle orifice of 1,0–1,5 mm, nozzle pressure 0,3–0,4 MPa
- Airless spray with machines: nozzle orifice of 0,44–0,49 mm, nozzle pressure 20 MPa
SUBSTRATE PREPARATION : If the overcoating time of the existing base coat has been exceeded, the surface may be roughened using light abrasive manual tools or mechanical equipment.All contamination such as dust, loose and friable material that could affect final finish or reduce adhesion, must be completely removed from all surfaces before application of the product, preferably by vacuum extraction equipment.MIXING : Prior to mixing all parts, mix separately Part A (resin) using an electric paddle mixer or other suitable equipment. Mix liquid and all the coloured pigment until a uniform colour / mix has been achieved. Add Part B (hardener) to Part A and mix Part A + B continuously for 3,0 minutes until a uniformly coloured mix has been achieved. Mix full units only. Mixing time for A+B = ~3,0 minutes.APPLICATION : Apply mixed product in 1 coat by roller, brush or spray equipment to achieve a consistent thickness and required surface finish.CLEANING OF EQUIPMENT : Clean all tools and application equipment with Thinner C immediately after use. Hardened material can only be removed mechanically or with a proprietary paint stripper.