Sika® SealTape F เทปสำหรับกันซึมบริเวณรอยต่อก่อนปูกระเบื้องในพื้นที่เปียกชื้นและสระว่ายน้ำ
Sika® SealTape Fเทปสำหรับกันซึมบริเวณรอยต่อก่อนปูกระเบื้องในพื้นที่เปียกชื้นและสระว่ายน้ำSika® SealTape F เป็นระบบยืดหยุ่นซึ่งใช้ร่วมกับผลิตภัณฑ์กันซึม Sika® ช่วยลดความเสี่ยงของการรั่วไหลผ่านตำแหน่งที่อาจเกิดการแตกร้าวที่มุมผนัง ส่วนที่เชื่อมต่อพื้นกับผนัง บริเวณรอบท่อ ฯลฯ
- มีความยืดหยุ่นสูง
- มีความแข็งแรงสูง
- ติดตั้งง่าย
การใช้งานเทปปิดรอยร้าวและกันรั่วซึมที่ใช้ร่วมกับผลิตภัณฑ์กันซึม Sika® เพื่อลดความเสี่ยงของการรั่วซึมในบริเวณที่เสี่ยงต่อการแตกร้าวสำหรับ :
- พื้นที่เปียกในอาคารที่อยู่อาศัยหรืออาคารพาณิชย์
- พื้นที่เก็บความเย็น ล้างรถ และครัว
- สระว่ายน้ำและโครงสร้างกักเก็บน้ำที่เคลือบ ปิดทับด้วยกระเบื้องเซรามิก
- ระเบียงและเฉลียง
- ใช้งานได้ทั้งภายในและภายนอก
คุณลักษณะ/คุณประโยชน์
- มีความยืดหยุ่นสูง
- มีความแข็งแรงสูง
- ติดตั้งง่าย
- กันน้ำรั่วซึม
- ยึดเกาะได้ดีกับผลิตภัณฑ์กันซึม Sika®
- ทนต่อสารเคมี
- ทนต่อแสงยูวี
บรรจุภัณฑ์
ประเภทของเทป: |
ขนาดบรรจุภัณฑ์ |
ปิดรอยต่อ |
10 เมตร ต่อม้วน 1 ม้วนต่อ กล่อง |
ปิดมุมด้านใน |
กล่องละ 20 ชิ้น |
ปิดมุมด้านนอก |
กล่องละ 20 ชิ้น |
ติดผนัง D14 |
กล่องละ 20 ชิ้น |
ติดพื้น |
กล่องละ 10 ชิ้น |
ขอบเอียง 20 มม., 28 มม., 38 มม., ด้านซ้ายและขวา |
กล่องละ 10 ชิ้น |
ลักษณะของสินค้า/สี : สีเหลืองข้อมูลผลิตภัณฑ์ส่วนประกอบหลักทางเคมี
แถบยึดติด |
ยางเทอร์โมพลาสติก (TPE) |
แถบเสริมความแข็งแรง |
โพรพิลีน |
อายุผลิตภัณฑ์ : 24 เดือน นับจากวันที่ผลิตการเก็บรักษา : จัดเก็บในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหาย บริเวณที่แห้งภายใต้อุณหภูมิระหว่าง 5ºC ถึง 30ºCความยาว
ความกว้าง
เทปปิดรอยต่อ |
~120 มิลลิเมตร |
ความหนา : ~0,66 มิลลิเมตรข้อมูลระบบ โครงสร้างระบบ Sika® SealTape F สามารถใช้ร่วมกับวัสดุยาแนว ดังนี้
- SikaTop® Seal-107: ซีเมนต์กันซึม 2 ส่วนผสม สำหรับงานกันซึมและป้องกันความชื้น
- Lanko 226: ซีเมนต์กันซึม ชนิดยืดหยุ่น 2 ส่วนผสม
- Lanko 227: ซีเมนต์กันซึมชนิดยืดหยุ่น ส่วนผสมเดียว
- Lanko 452: โพลิเมอร์กันซึมพร้อมใช้
สำหรับผลิตภัณฑ์อื่นที่คล้ายคลึงกัน ซึ่งอาจเหมาะสำหรับใช้กับ Sika® SealTape F โปรดติดต่อฝ่ายบริการด้านเทคนิคของซิก้าความเข้ากันได้ : ไม่ควรสัมผัสโดยตรงกับวัสดุยาแนวหรือยึดติดที่เป็นตัวทำละลายข้อมูลทางเทคนิคค่ากำลังรับแรงดึง
ความยาว |
≥ 85 นิวตัน / 15 มิลลิเมตร |
ด้านข้าง |
≥ 15 นิวตัน / 15 มิลลิเมตร |
อุณหภูมิการใช้งาน : ต่ำสุด -30 °C / สูงสุด +90 °Cการกันซึม
≥ 1.5 บาร์ |
(DIN EN 1928, Procedure B) |
ความหนาของชั้นอากาศเทียบเท่ากับไอน้ำ
Sd ≥ 7 เมตร |
(DIN EN 1931) |
ความต้านทานต่อสารเคมี : ทนต่อสารเคมีหลายชนิด โปรดติดต่อฝ่ายบริการด้านเทคนิคของซิก้าสำหรับข้อมูลเพิ่มเติมความต้านทานต่อรังสียูวี
≥ 500 ชั่วโมง |
(DIN EN ISO 4892-2) |
ข้อมูลการใช้งานอุณหภูมิแวดล้อม : ต่ำสุด +5 °C / สูงสุด +25 °C (ดูเอกสารข้อมูลผลิตภัณฑ์ของระบบกันซึมที่ใช้)อุณหภูมิของพื้นผิว : ต่ำสุด +5 °C / สูงสุด +25 °C (ดูเอกสารข้อมูลผลิตภัณฑ์ของระบบกันซึมที่ใช้)ขั้นตอนการใช้งานการเตรียมพื้นผิว : พื้นผิวต้องแข็งแรง สะอาด แห้ง ปราศจากเศษหลุดร่อน สิ่งปนเปื้อน เช่น ฝุ่น สิ่งสกปรก น้ำมัน ขี้ผึ้งขัดเงา จารบี คราบกาวเก่า หรือคราบซีเมนต์ พื้นผิวเรียบแต่จะต้องหยาบเล็กน้อย ควรกำจัดฝุ่นออกเพื่อเพิ่มการยึดเกาะการใช้งาน : ต้องอิงถึงเอกสารประกอบเพิ่มเติมหากมี เช่น คำชี้แจงวิธีการที่เกี่ยวข้อง คู่มือการใช้ และคำแนะนำในการติดตั้งหรือการทำงานSika® SealTape F (เทปปิดรอยต่อ)
- ติดเทปกาวลงบนผลิตภัณฑ์กันซึม Sika® ชั้นที่ 1 ที่ยังเปียกโดยใช้เกรียงหรือไม้พายทำให้เรียบ
- เพื่อรองรับการเคลื่อนไหว สามารถใช้เทปพัน ปิดทับรอยร้าวได้
- เทปต้องซ้อนทับกันอย่างน้อย 50 มม.
- ทาผลิตภัณฑ์กันซึมชั้นที่ 2 บนเทปและ เมื่อกันซึมชั้นแรกที่แห้งตัวแล้ว
Sika® SealTape F wall patch (เทปติดผนัง)
- ติดเทปในลักษณะเดียวกับเทป Sika® SealTape F
- สำหรับท่อ ให้มีส่วนที่ยืดได้อย่างน้อย 4 มม. ที่ต้องสัมผัสกับพื้นผิวท่อ
Sika® SealTape F floor patch (เทปติดพื้น)
- ตัดให้ได้ขนาดที่เหมาะสมโดยใช้กรรไกรหรือมีดโกนหนวด
- ติดในลักษณะเดียวกับเทป Sika® SealTape F

Sika® SealTape FCrack-bridging waterproof sealing tapeSika® SealTape F is an elastic system component which is used in combination with Sika® waterproofing products. It reduces the risk of leaks through potential cracking locations at wall corners, floor-to-wall connections, pipe entries etc.
- High elasticity
- High breaking strength
- Easy to install
Usage Crack-bridging and waterproofing tape used in combination with Sika® waterproofing products for reducing the risk of leakage at locations at risk to cracking for:
- Residential or commercial wet rooms
- Cold storage areas, car washes and catering kitchens
- Swimming pools and water retaining structures in combination with ceramic coverings
- Balconies and terraces
- Interior and exterior use
Advantages
- High elasticity
- High breaking strength
- Easy to install
- Waterproof and watertight
- Good adhesion to Sika® waterproofing products
- Chemical resistant
- Resistant to UV exposure
Packaging
Preformed sections: |
Packaging |
Sealing tape |
10 m roll 1 roll per carton box |
Inside corner |
Box with 20 pieces |
Outside corner |
Box with 20 pieces |
Wall patch D14 |
Box with 20 pieces |
Floor patch |
Box with 10 pieces |
Slope edge 20 mm, 28 mm, 38 mm, left and right |
Box with 10 pieces |
Refer to the current price list for packaging variationsColour : YellowProduct InformationComposition
Sealing layer |
Thermoplastic elastomers (TPE) |
Fleece |
Polypropylene |
Shelf life : 24 months from date of productionStorage conditions : The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packagingLength
Width
Thickness : ~0,66 mmSystem Information System structure Sika® SealTape F is used in combination with the following seals:
- SikaTop® Seal-107: a dual-component cementitious slurry
- Lanko 226: a dual-component cementitious mortar
- Lanko 227: a single component cementitious flexible mortar
- Lanko 452: a ready-to-use acrylic waterproofing membrane
For other similar Sika® products that may also be suitable for use with Sika® SealTape F, contact Sika Technical Services Department.Compatibility : Not suitable for direct contact with solvent based sealants or adhesivesTechnical Information Tensile strength
Longitudinal |
≥ 85 N / 15 mm |
Lateral |
≥ 15 N / 15 mm |
Service temperature : -30 °C min. / +90 °C max.Watertightness
≥ 1,5 bar |
(DIN EN 1928, Procedure B) |
Equivalent air layer thickness for water vapour
Chemical resistance : Resistant to many chemicals. Contact Sika Technical Services for additional information.Resistance to UV exposure
≥ 500 hours |
(DIN EN ISO 4892-2) |
Application Information Ambient air temperature : +5 °C min. / +25 °C max. (refer to the product data sheet of the waterproofing system used)Substrate temperature : +5 °C min. / +25 °C max. (refer to the PDS of the waterproofing system used)Application stepsSUBSTRATE PREPARATION : All substrates must be stable, clean, dry, free of any loose or friable particles, contaminants such as dust, dirt, oil, wax polish, grease, old adhesive residue, cement laitance or efflorescence. Smooth surfaces must be roughened lightly and dust removed to improve adhesion.APPLICATION : Reference must be made to further documentation where applicable, such as relevant method statement, application manual, and installation or working instructions.Sika® SealTape F
- Embed tape into the 1st layer of the wet Sika® waterproofing product using a smoothing trowel or spatula.
- To accommodate movement, a loop can be made with the tape over the crack.
- Overlaps must be ≥ 50 mm.
- On top of the hardened 1st layer and tape, apply a 2nd layer of the Sika® waterproofing product.
Sika® SealTape F wall patch
- Embed in the same way as the Sika® SealTape F tape.
- For pipes, a minimum 4 mm of the stretchable part needs to be in contact with the pipe surface.
Sika® SealTape F floor patch
- Cut to the appropriate size using scissors or a razor knife.
- Embed in the same way as the Sika® SealTape F tape.