Sika® Aer TH สารกักกระจายฟองอากาศ
Sika® Aer THสารกักกระจายฟองอากาศSika® Aer TH เป็นน้ำยาผสมเพิ่มในคอนกรีตที่มีความเข้มข้นสูง เพื่อเพิ่มปริมาณฟองอากาศให้กับคอนกรีตโดยฟองอากาศที่ได้ จะมีขนาดเล็กมากกระจายตัวอยู่ในคอนกรีต ประสิทธิภาพของ สารกักกระจายฟองอากาศขึ้นอยู่กับปริมาณที่ใช้ในการผสมที่ถูกต้อง และลักษณะการสร้างเป็นฟองอากาศ (AIR PORES) กระจายอยู่ ทั่วไปในคอนกรีตSika® Aer TH มีคุณสมบัติดังนี้ :
- เพิ่มคุณสมบัติการต้านทานการจับตัวเป็นน้ำแข็ง
- ปรับปรุงความสามารถในการทำงาน
- ปรับปรุงคอนกรีตให้มีความคงทนมากขึ้น
การใช้งานใส่ Sika® Aer TH ผสมในคอนกรีตเพื่อเพิ่มคุณสมบัติการไหลลื่น ให้ดีขึ้น และเพิ่มคุณสมบัติความคงทนให้กับคอนกรีต เหมาะสำหรับงาน :
- ถนน
- ถนนรันเวย์ (ถนนสำหรับคนวิ่ง) และถนนสำหรับรถวิ่ง
- ลานจอดเครื่องบิน และลู่วิ่งของสนามบิน
- เขื่อนและอ่างเก็บน้ำ
- โครงสร้างคอนกรีตมวลเบา
- คอนกรีตห้องเย็น
คุณลักษณะ/คุณประโยชน์Sika® Aer TH มีคุณสมบัติดังนี้ :
- เพิ่มคุณสมบัติการต้านทานการจับตัวเป็นน้ำแข็ง
- ปรับปรุงความสามารถในการทำงาน
- ปรับปรุงคอนกรีตให้มีความคงทนมากขึ้น
- เพิ่มคุณสมบัติการยึดเกาะ ลดอัตราการแยกตัว
- ลดปริมาณการใช้น้ำ โดยยังคงคุณสมบัติการทำงาน
- ไม่มีผลต่อระยะเวลาการก่อตัวแม้ว่าจะใช้น้ำยาในปริมาณที่เกินกว่ากำหนด
บรรจุภัณฑ์ 25 ลิตร/ถัง200 ลิตร/ถังลักษณะของสินค้า/สี : สีน้ำตาลการรับรองมาตรฐาน : คุณสมบัติเทียบเท่ามาตรฐาน TIS 874ข้อมูลผลิตภัณฑ์ ส่วนประกอบหลักทางเคมี : Surface Active Agents, Surfactantsอายุผลิตภัณฑ์ : 12 เดือน นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธี ภายในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหายการเก็บรักษา : จัดเก็บในบริเวณที่แห้ง ไม่โดนแสงแดดโดยตรงที่อุณหภูมิ 5°C ถึง 40°Cความหนาแน่น : 1.00 - 1.02 กิโลกรัม/ลิตร (ที่อุณหภูมิ 25°C)ข้อมูลการใช้งาน การจ่ายน้ำยา : ผสมน้ำยา Sika® Aer TH ลงไปในน้ำก่อนที่จะเติมวัสดุผสมอื่นๆอัตราการใช้ : 30 - 150 ซีซี โดยนํ้าหนักปูนซีเมนต์ 100 กิโลกรัม ปริมาณการใช้น้ำยาที่ถูกต้องนั้นกำหนดได้
จากการทดสอบเพื่อหาความต้องการปริมาณฟองอากาศที่เหมาะสมในคอนกรีต จากอุปกรณ์
วัดปริมาณฟองอากาศ (AIR METERS) ปัจจัยที่มีผลต่อปริมาณฟองอากาศได้แก่ ประเภทของวัสดุ
ที่ใช้ ขนาดและปริมาณของทราย ซีเมนต์ และหิน ปริมาณซีเมนต์ต่อหนึ่งลูกบาศก์เมตร ประเภท
และความละเอียดของซีเมนต์ อัตราส่วนน้ำ ต่อซีเมนต์ และอุณหภูมิขณะทำงาน
ในบางกรณีอาจต้องใช้น้ำยามากกว่า 150 ซีซี ควรทำการทดสอบมาตรวัดอากาศอย่างสม่ำเสมอ
และปรับอัตราปริมาณการใช้เพื่อควบคุมปริมาณการกักอากาศอย่างสมบูรณ์ ซึ่งควรอยู่ในช่วง
3 - 6%

Sika® Aer THAir Entraining Concrete Admixture
Sika® Aer TH A ready to use highly concentrated air entraining concrete admixture.Its efficiency is based upon the entrainment into the mix of a high number of correctly sized and evenly distributed air pores.Sika® Aer TH provides the following properties :
- Increased frost resistance
- Improved workability
- Improved durability
Usage Sika® Aer TH is used to produce easily workable and durable concrete for :
- Roads
- Runways and taxi ways
- Aprons and hard standings
- Dams and reservoirs
- Mass concrete structures
- Freezing concrete
Advantages Sika® Aer TH provides the following properties :
- Increased frost resistance
- Improved workability
- Improved durability
- Increased cohesion reducing the risk of segregation
- Reduced water content without loss of workability
- Unaffected setting time even when overdosed
Packaging 25 L/pail 200 L/drum Colour : BrownAPPROVALS / CERTIFICATES : Complies with TIS 874Product Information Composition : Surface Active Agents, SurfactantsShelf life : 12 months from the date of production If stored properly in undamaged,original, sealed packaging.Storage conditions : Store in dry conditions, protected from direct sunlight at temperature between 5°C and 40°CDensity : 1.00 - 1.02 kg/L (at temperature 25°C)Application Information Dispensing : Sika® Aer TH is added directly to the mixing water prior to its addition to the aggregates.Recommended Dosage : 30-150 cc. per 100 kg. of cement weight. Exact dosage rates are determined by air meter tests in trial mixes. Factors affecting air contents, include:type, grading and proportion of sand, cement and aggregates. Cement content per cubic metre. Type and fineness of cement. Water cement ratio and temperature.In certain cases therefore, it may be necessary to increase the 150 cc dosage rate. Air meter tests should be taken consistently and adjustments made to the dosage rate in order to completely control the amount of air entrainment,which should be in the range of 3-6%.