Sika® Antisol® E TH น้ำยาบ่มคอนกรีต
Sika® Antisol® E THน้ำยาบ่มคอนกรีตSika® Antisol® E TH เป็นน้ำยาบ่มคอนกรีตพร้อมใช้งาน เพื่อป้องกันการระเหยตัวของน้ำจากผิวหน้าคอนกรีตสด Sika® Antisol® E TH จะก่อตัวเป็นชั้นฟิล์มบาง ๆ เคลือบผิวหน้าคอนกรีต ทั้งนี้ไม่มีผลกระทบต่อการแข็งตัวของคอนกรีต
- ช่วยปรับปรุงลักษณะของพื้นผิว
- ลดการแตกร้าว
- ช่วยให้ได้กำลังอัดตามที่ต้องการ
การใช้งานเหมาะสำหรับการบ่มคอนกรีตบนพื้นที่ขนาดใหญ่ที่อยู่นอกอาคาร เช่น:
- ถนน และถนนทางหลวง
- ทางวิ่งเครื่องบิน
- ดาดฟ้า
- โรงเก็บเครื่องบิน และพื้นที่สำหรับโหลดสินค้า
- กำแพงกันดิน
- โครงสร้างคอนกรีตอัดแรง
- ช่องชลประทาน
- โครงสร้างวิศวกรรมโยธา
- แผ่นพื้นอุตสาหกรรม
คุณลักษณะ/คุณประโยชน์
- ช่วยปรับปรุงลักษณะของพื้นผิว
- ลดการแตกร้าว
- ช่วยให้ได้กำลังอัดตามที่ต้องการ
- ลดการหดตัว
- ช่วยทำให้คอนกรีตเกิดปฏิกริยาไฮเดรชั่นที่สมบูรณ์
- ลดการเกิดฝุ่น
- เพิ่มความต้านทานปฏิกิริยา freeze / thaw
- ทำให้ต้นทุนลดลงเมื่อเทียบกับการบ่มประเภทอื่น
บรรจุภัณฑ์25 ลิตร/ถัง200 ลิตร/ถังลักษณะของสินค้า/สี : น้ำยาอิมัลชั่นแวกซ์สีขาวการรับรองมาตรฐาน : คุณสมบัติเทียบเท่ามาตรฐาน ASTM C 156ข้อมูลผลิตภัณฑ์อายุผลิตภัณฑ์ : 6 เดือน นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธีในบรรจุภัณฑ์ที่ไม่เสียหายและปิดสนิทการเก็บรักษา : จัดเก็บในบริเวณที่แห้ง ไม่โดนแสงแดดโดยตรง ในที่อุณหภูมิ ระหว่าง 5°C ถึง 30°Cความหนาแน่น : 0.96 - 1.00 กิโลกรัม ต่อลิตรข้อมูลการใช้งาน เครื่องมือและอุปกรณ์การทำงาน
- ใช้เครื่องพ่นมือ หรือเครื่องพ่นไฟฟ้า
- ตรวจสอบความเหมาะสมของอุปกรณ์ก่อนการใช้งาน
- ทำความสะอาดเครื่องมือและอุปกรณ์การทำงานทันทีหลังการใช้งาน วัสดุที่แข็งติดกับเครื่องมือและอุปกรณ์ ต้องกำจัดออกด้วยใช้เครื่องมือทางกลเท่านั้น
ปริมาณการใช้ : 5.0 - 6.5 ตารางเมตร ต่อ 1 ลิตรปริมาณการใช้จริงขึ้นอยู่กับความแรงของลม อุณหภูมิ และความชื้นระหว่างการใช้งานตัวเลขเหล่านี้เป็นตัวเลขเชิงทฤษฎี ซึ่งอาจจะต้องใช้เพิ่มขึ้นอันเนื่องมาจากความพรุนของพื้นผิว ความเรียบของพื้นผิว ระดับของพื้นผิวที่แตกต่างกัน หรือการสูญเสียระหว่างการทำงาน เป็นต้นการใช้งาน : กวนน้ำยาให้เข้ากันให้ดีก่อนก่อนใช้งาน เพื่อให้แน่ใจว่าน้ำยาไม่แยกชั้น พ่นน้ำยาให้เป็นลักษณะฝอย ให้ทั่วพื้นผิวคอนกรีต รักษาแรงดันอุปกรณ์ ที่ใช้ในการพ่น เพื่อให้แน่ใจว่าพ่นน้ำยาได้สม่ำเสมอ

Sika® Antisol® E THCONCRETE CURING AGENT
Sika® Antisol® E TH is a ready to use spray applied liquid curing agent to prevent water loss from the surface of freshly placed concrete. It forms a thin film barrier on the concrete without affecting the normal setting action.
- Generally improves the surface appearance
- Reduces cracking
- Ensures achievement of required strengths
- Reduces shrinkage
- Controls cement hydration
- Reduces dust formation
- Improves freeze / thaw resistance
- Alleviates other costly curing methods
Usage Large areas of exposed concrete such as :
- Roads and Highways
- Runways
- Roof decks
- Hangars and loading areas
- Retaining walls
- Pre-stressed structures
- Irrigation channels
- Civil Engineering structures
- Industrial floor slabs
Advantages
- Generally improves the surface appearance
- Reduces cracking
- Ensures achievement of required strengths
- Reduces shrinkage
- Controls cement hydration
- Reduces dust formation
- Improves freeze / thaw resistance
- Alleviates other costly curing methods
Packaging 25 L/pail200 L/drumColour : Liquid white pigmented emulsionAPPROVALS / CERTIFICATES : Complies with ASTM C 156Product InformationShelf life : 6 months from date of production if stored properly in undamaged, original, sealed packagingStorage conditions : Store in dry conditions, protected from direct sunlight at temperatures between +5 °C and +30 °C. Always refer to packaging.Density : 0.96 - 1.00 kg/LApplication Information Equipment Application
- Hand type backpack or motorised sprayers
- Suitability of equipment should be approved before using for full application
- Clean all tools and application equipment immediately after use. Hardened material can only be removed mechanically.
Consumption : 5.0-6.5 m2 per literConsumption depends on wind speed, temperature and humidity during application.These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc.APPLICATION : Stir thoroughly before use to ensure full dispersion of solids. Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.