SikaPlast®-713 TH น้ำยาผสมคอนกรีตประเภทลดน้ำปานกลาง
SikaPlast®-713 THน้ำยาผสมคอนกรีตประเภทลดน้ำปานกลางSikaPlast®-713 TH เป็นน้ำยาผสมคอนกรีตประเภทลดน้ำระดับ ปานกลางที่มีส่วนผสมของสารละลายโพลีเมอร์สังเคราะห์และ สารเติมแต่ง
- สามารถลดน้ำได้ถึง 15 % เมื่อเทียบกับคอนกรีตที่ไม่ได้ใช้น้ำยาลดน้ำ
- ทำให้ใช้ประโยชน์จากซีเมนต์ได้มากขึ้น
- ช่วยทำให้การซึมผ่านของน้ำลดลง
การใช้งาน
- ใช้เมื่อต้องการลดต้นทุนสำหรับคอนกรีตทั่วไป
- ใช้เมื่อต้องการเพิ่มความสามารถในการเท
- ใช้ผสมในเมื่อต้องการลดการใช้ซีเมนต์
- เหมาะสำหรับคอนกรีตที่มีสารทดแทนซีเมนต์อยู่ในส่วนผสม เช่น เถ้าลอยหรือเถ้าตะกรัน
คุณลักษณะ/คุณประโยชน์
- สามารถลดน้ำได้ถึง 15 % เมื่อเทียบกับคอนกรีตที่ไม่ได้ใช้น้ำยาลดน้ำ
- ทำให้ใช้ประโยชน์จากซีเมนต์ได้มากขึ้น
- ช่วยทำให้การซึมผ่านของน้ำลดลง
- ค่ากำลังอัดเทียบเท่าคอนกรีตที่ไม่ได้ใช้น้ำยาลดน้ำ โดยใช้ซีเมนต์ในปริมาณที่น้อยกว่า
- ปรับปรุงค่ากำลังอัดในช่วงปลายให้ดีขึ้น
- ชดเชยค่ากำลังอัดช่วงต้นของคอนกรีตที่มีสารทดแทนซีเมนต์ (เถ้าลอยหรือเถ้าตะกรัน) อย่างมีประสิทธิผล
- เพิ่มความสามารถในการเทและการหล่อเข้าแบบ
- ช่วยยืดระยะเวลาการยุบตัวของคอนกรีต
บรรจุภัณฑ์200 ลิตร/ถังลักษณะของสินค้า/สี : ของเหลวสีน้ำตาลอ่อนการรับรองมาตรฐาน : คุณสมบัติเทียบเท่ามาตรฐาน ASTM C494 ประเภท A และ Dข้อมูลผลิตภัณฑ์ อายุผลิตภัณฑ์ : 12 เดือน นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธี ภายในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหายการเก็บรักษา : จัดเก็บในบริเวณที่แห้ง ไม่โดนแสงแดดโดยตรง ที่อุณหภูมิ 5°C ถึง 40°Cความหนานแน่น : 1.095 - 1.115 กก. / ลิตร (ที่อุณหภูมิ 25°C)ค่าความเป็นกรด-ด่าง : 9.0 - 11.0 โดยประมาณข้อมูลการใช้งาน การจ่ายน้ำยา : เติมนํ้ายา SikaPlast®-713 TH ในปริมาณที่เหมาะสมที่โรงงานผลิตคอนกรีต โดยใช้เครื่องจ่าย นํ้ายาอัตโนมัติผ่านท่อนํ้าเข้าสู่เครื่องผสมคอนกรีต ห้ามเติมนํ้ายาลงในทรายแห้งหรือซีเมนต์โดยตรงอัตราการใช้ : ปริมาณที่แนะนำ 300-800 ซีซี ต่อนํ้าหนัก 100 กิโลกรัม ของซีเมนต์หรือซีเมนต์รวมส่วนผสม ทดแทน ปริมาณการใช้งานจริงขึ้นอยู่กับความต้องการและควรกำหนดจากการทดสอบ ภายในห้องทดลอง

SikaPlast®-713 THMid-range Water Reducing Concrete AdmixtureSikaPlast® -713 TH is a newly developed admixture for concrete with mid-range reducing effect. It is concentrated solution based on Synthetic Polymer and additives.
- Water reduction up to 15% against control mix
- Improved utilization of cement
- Improved watertightness
Usage
- Cost effectiveness required for conventional concrete
- Where increased workability is required
- Use in mixes where cement saving is required
- Especially suitable for concrete containing cement replacements such as PFA (fly ash) or GGBFS (slag)
Advantages
- Water reduction up to 15% against control mix
- Improved utilization of cement
- Improved watertightness
- Equal strengths to control mix with less cement
- Better improvement for final strength
- Compensates for slow early strength gain achieved by cement replacements (PFA,GGBFS)
- Increased workability and placeability
- Longer slump retention
Packaging 200 l/drum Colour : Light Brown LiquidAPPROVALS / CERTIFICATES : Complies with ASTM C494 Type A & DProduct InformationShelf life : 12 months from the date of production If stored properly in undamaged, original, sealed packaging.Storage conditions : Store in dry conditions, protected from direct sunlight at temperature between 5°C and 40°C.Density : 1.095 - 1.115 kg / l (at temperature 25°C)pH-Value : 9.0 - 11.0 Approx.Application Information Dispensing : Add the correct amount of SikaPlast®-713TH at the concrete plant. Addition should be by automatic dispenser into the water line at the batching plant. Do not add directly on to the dry sand or cement.Recommended Dosage : Recommend dosage 300 - 800 CC. per 100 kg. of cement or cementitious weight. Actual dosage depends on requirements and should be established from laboratory trials.
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c