Davco AC-2 กาวซีเมนต์ติดกระเบื้องทั่วไป
Davco AC-2กาวซีเมนต์ติดกระเบื้องทั่วไปDavco AC-2 เป็นกาวซีเมนต์ สำหรับปูกระเบื้องเซรามิกทั่วไป
- มีค่าการยึดเกาะที่ดี
- เหมาะสำหรับปูกระเบื้องเซรามิก ขนาดกว้างถึง 30 x 30 ซม.
- สามารถใช้ปูกระเบื้องบนผนัง และพื้น
การใช้งาน
- งานพื้นภายนอก และภายใน
- งานผนังภายใน
- พื้นผิว: ซีเมนต์
คุณลักษณะ/คุณประโยชน์
- มีค่าการยึดเกาะที่ดี
- เหมาะสำหรับปูกระเบื้องเซรามิก ขนาดกว้างถึง 30 x 30 ซม.
- สามารถใช้ปูกระเบื้องบนผนัง และพื้น
- กาวซีเมนต์ที่คุ้มค่า สามารถใช้แทนวิธีการปูกระเบื้องแบบดั้งเดิม
บรรจุภัณฑ์ : 20 กก./ ถุงลักษณะของสินค้า/สี : ผงซีเมนต์สีเทาข้อมูลผลิตภัณฑ์ส่วนประกอบหลักทางเคมี : ปูนซีเมนต์ สารเติมเต็ม และสารผสมเพิ่มอายุผลิตภัณฑ์ : 12 เดือน นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธี ภายในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหายการเก็บรักษา : จัดเก็บในบริเวณที่แห้ง และไม่โดนแสงแดดโดยตรง ความหนาแน่น : 1.2 ± 0.1 กก./ ลิตรค่าความเป็นกรด-ด่าง : 12 ± 1ข้อมูลการใช้งานอัตราส่วนผสม : Davco AC-2 1 ถุง (20 กก.) ต่อน้ำ 4.5 - 5.0 ลิตรอุณหภูมิแวดล้อม : +5°C ถึง +35°Cระยะเวลาการใช้งานหลังผสม : 180 - 240 นาที (ที่อุณหภูมิ 25°C)ระยะเวลาทำงาน : 10 - 15 นาที (ที่อุณหภูมิ 25°C)ระยะเวลาที่ยังสามารถแก้ไขงานได้ : 10 - 15 นาที (ที่อุณหภูมิ 25°C)ระยะเวลาที่พร้อมใช้งาน : ~ 24 ชั่วโมงขั้นตอนการใช้งานการผสม
- ใช้เครื่องปั่นผสม Davco AC-2 (1 ถุง) กับน้ำสะอาด 4.5 - 5.0 ลิตร ปั่นจนส่วนผสมเนียนเป็นเนื้อเดียวกัน
- พักส่วนผสมทิ้งไว้ ประมาณ 2 -3 นาที เพื่อให้เกิดปฏิกิริยาของสารเคมี ที่ดี มีประสิทธิภาพ และลดฟองอากาศ ก่อนใช้งาน
การใช้งาน
- ใช้เกรียงหวี ปาดกาวซีเมนต์บนพื้นผิว
- ปูกระเบื้องบนกาวซีเมนต์ และใช้ค้อนยางเคาะบนกระเบื้อง
- หากกระเบื้องขนาดกว้างมากกว่า 25 ซม. x 25 ซม. ขึ้นไป แนะนำให้ใช้กาวซีเมนต์ ปาดบริเวณด้านหลังกระเบื้องเป็นชั้นบาง ๆ ก่อนปูกระเบื้องลงบนพื้นผิวกาวซีเมนต์

Davco AC-2CEMENT BASED TILE ADHESIVE
Davco AC-2 is a general cement based tile adhesive for ceramic tile.
- Good bonding strength
- Suitable for fixing ceramic tile up to 30 x 30 cm.
- Tile on wall and floor
Usage
- Exterior and Interior Floor
- Interior wall
- Substrates: Cement
Advantages
- Good bonding strength
- Suitable for fixing ceramic tile up to 30 x 30 cm.
- Tile on wall and floor
- Good value tile adhesive to replace traditional mortar
Packaging : 20 kg/ bagColour : Grey powderProduct InformationComposition : Hydraulic binder, mineral filler and admixturesShelf life : 12 months from date of production if stored in undamaged and unopened, original sealed packaging.Storage conditions : Store in dry condition and protected from direct sunshine.Density : 1.2 ± 0.1 kg/LpH-Value : 12 ± 1Application InformationMixing ratio : Approx. 4.5 to 5 litre water per bag 20 kgAmbient air temperature : +5°C to +35°CPot Life : 180 - 240 minutes (at 25°C)Open Time : 10 - 15 minutes (at 25°C)Adjustability time : 10 - 15 minutes (at 25°C)Applied product ready for use : ~ 24 hoursApplication stepsMIXING
- Mix Davco AC-2 20 kg with 4.5 - 5 Litres of clean water by electrical mixer until the compound is evenly distributed.
- Allow the mixture to stand for 2 - 3 minutes for good reaction and reducing air bubble before using the adhesive.
APPLICATION
- Spread tile adhesive by using notched trowel onto substrate.
- Fix tile on tile adhesive and knocked over with rubber hammer.
- The dual bonding will be applied when size of tile is over than 25 cm x 25 cm. Applying thin layer of tile adhesive onto a back of tile, then fix the tile on tile adhesive substrate.