LANKO 202 MATRYX ซีเมนต์กันซึม ชนิดตกผลึก
LANKO 202 MATRYXซีเมนต์กันซึม ชนิดตกผลึกLANKO 202 MATRYX เป็นซีเมนต์กันซึมตกผลึก ส่วนผสมเดียว ซึ่งเนื้อกันซึมสามารถแทรกซึมเข้าไปในรูพรุนของคอนกรีตเพื่อกันน้ำได้
- เนื้อกันซึมสามารถแทรกซึมเข้าไป และเกิดผลึกในรูพรุน ของคอนกรีตได้
- สามารถรับแรงดันน้ำ ทั้งด้านที่สัมผัสน้ำโดยตรง และด้านที่ไม่สัมผัสน้ำ
- ส่วนผสมเดียว เพียงผสมกับน้ำสะอาดเท่านั้น
การใช้งาน
- บริเวณใช้งานหลัก : สำหรับพื้นใต้ดินก่อนการเทคอนกรีต
- ใช้สำหรับงานภายในและภายนอก
- อาคารจอดรถ, ใต้ดิน
- ใช้ได้กับพื้นผิวคอนกรีตและพื้นผิวปูนทราย
คุณลักษณะ/คุณประโยชน์
- เนื้อกันซึมสามารถแทรกซึมเข้าไป และเกิดผลึกในรูพรุน ของคอนกรีตได้
- สามารถรับแรงดันน้ำ ทั้งด้านที่สัมผัสน้ำโดยตรง และด้านที่ไม่สัมผัสน้ำ
- ส่วนผสมเดียว เพียงผสมกับน้ำสะอาดเท่านั้น
บรรจุภัณฑ์ : 25 กก. / ถุงลักษณะของสินค้า/สี : ผงซีเมนต์สีเทาข้อมูลผลิตภัณฑ์ส่วนประกอบหลักทางเคมี : ซีเมนต์, สารผสมเพิ่มและสารเติมเต็มอายุผลิตภัณฑ์ : 1 ปี นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธี ภายในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหายการเก็บรักษา : จัดเก็บในบริเวณที่แห้ง และไม่โดนแสงแดดโดยตรงความหนาแน่น : 0.9 - 1.1 กก. / ลิตรขนาดอนุภาคสูงสุด : 0.04 - 0.5 มม.ข้อมูลทางเทคนิคค่ากำลังรับแรงยึดเกาะต่อแรงดึง : > 0.5 MPa ที่ 28 วัน (การยึดเกาะกับคอนกรีต)ข้อมูลการใช้งานอุณหภูมิแวดล้อม : +5 °C ถึง +35 °C.ปริมาณการใช้
2 กก. / ตร.ม. (สำหรับการทา)
3 - 3.5 กก. / ตร.ม. (สำหรับการโรย - ด้านที่ไม่สัมผัสกับน้ำ)
2 กก. / ตร.ม. (สำหรับการโรย - ด้านที่สัมผัสกับน้ำ)ขั้นตอนการใช้งานการผสม
การเตรียมวัสดุ - สำหรับการทา
- ใช้เครื่องในการปั่นผสม LANKO 202 MATRYX 25 กก. 1 ถุง กับน้ำสะอาด 7.25 - 7.75 ลิตร ให้เข้าเป็นเนื้อเดียวกัน
- ใช้สว่านขนาดใหญ่พร้อมใบปั่นความเร็วไม่เกิน 500 รอบ/นาที
- ปั่นผสมต่อเนื่องเป็นเวลา 3 นาที จนเข้าเป็นเนื้อเดียวกัน
- พักส่วนผสมทิ้งไว้ 1 - 3 นาที
- หลังจากผสมเสร็จแล้ว ห้ามเติมน้ำเพิ่ม
การใช้งาน
วิธีการใช้งานด้วยการทา
- ใช้แปรงทา LANKO 202 MATRYX ลงไปบนพื้นผิว โดยใช้ปริมาณ
1 กก. / ตร.ม.
- รอให้ชั้นแรกแห้งตัว แต่ยังไม่แห้งสนิทเพื่อป้องกันไม่ให้ผลิตภัณฑ์ ชั้นแรกหลุดล่อนในขณะที่ทาชั้นที่ 2 โดยทาชั้นที่ 2 ในทิศทาง
ตรงข้ามกับชั้นแรก ใช้ปริมาณ 1 กก. / ตร.ม.
วิธีการใช้งานสำหรับระบบกันซึมแรงดันน้ำด้านลบโดยวิธีโรยผงแห้ง (ด้านที่ไม่สัมผัสกับน้ำโดยตรง)
โรยผง LANKO 202 MATRYX ลงไปบนพื้นผิวที่ต้องการโดยตรง ปริมาณการใช้ประมาณ 3 - 3.5 กก. / ตร.ม. โดยให้โรยระหว่างที่ผิวคอนกรีตอยู่ในช่วงใกล้เซ็ทตัว (initial set) หลังจากนั้นใช้เกรียงปาดหน้าเพื่อให้ได้ผิวที่เรียบ และมีความสม่ำเสมอ ของเนื้อผลิตภัณฑ์วิธีการใช้งานสำหรับระบบกันซึมแรงดันน้ำด้านบวกโดยวิธีโรยผงแห้ง (ด้านที่สัมผัสกับน้ำโดยตรง) โรยผง LANKO 202 MATRYX ลงไปบนพื้นผิวที่ต้องการโดยตรง ก่อนที่จะเทคอนกรีตทับหน้า ปริมาณการใช้ประมาณ 2 กก. / ตร.ม.
วิธีการบ่ม
- หลังจากที่ LANKO 202 MATRYX เซ็ทตัว และผิวหน้า มีความแกร่งแล้ว ทำการบ่มพื้นผิวด้วยน้ำสะอาดในช่วง 2 - 3 วันแรก
- ในกรณีที่ใช้งานผลิตภัณฑ์ในที่ๆร้อนจัด ควรบ่มน้ำ 4 - 5 วัน
- ในพื้นที่ด้านนอกอาคารที่มีฝนตก แสงแดดรุนแรง หรือมีน้ำขัง ควรป้องกันพื้นผิวอย่างน้อย 24 ชั่วโมง

LANKO 202 MATRYXCEMENTITIOUS WATERPROOFING BY CRYSTALLISATION
LANKO 202 MATRYX is one part cementitious waterproofing slurry modified with selected aggregates and active chemicals. The slurry will migrate in the concrete pore to prevent the penetration of water to all types of concrete structures.
- Migration of active components and crystalline formation to seal capillary network.
- Resistance to positive and negative water pressure.
- One component system requiring only the addition of clean water.
Usage
- Main use : underground floor before pouring fresh concrete.
- Interior/Exterior.
- Underground car park, basement.
- Substrates : concrete, mortar.
Advantages
- Migration of active components and crystalline formation to seal capillary network.
- Resistance to positive and negative water pressure.
- One component system requiring only the addition of clean water.
Packaging : 25 kg bagColour : Grey powderProduct InformationComposition : Hydraulic cement, additives and mineral fillerShelf life : 1 year from date of manufacture if stored in unopened original packaging in dry conditionStorage conditions : Stored in unopened original packaging in dry condition.Density : Stored in unopened original packaging in dry condition.Maximum grain size : 0.04 - 0.5 mmTechnical InformationTensile adhesion strength : Adhesion to concrete 28 days > 0.5 MPaApplication Information Ambient air temperature : +5 °C to +35 °C.Consumption2 kg / sq.m. (Wet method)3 - 3.5 kg / sq.m. (Dry shake - negative waterproofing)2 kg / sq.m. (Dry shake - positive waterproofing)Application stepsMIXING
Product Preparation - Wet Method
- Mix with power drill one 25 kg. bag with 7.25 to 7.75 litres. of clean water until the product is evenly distributed.
- Use mixing machine mix at low speed not over than 500 RPM.
- Mixing time: at least 3 minutes or required consistency is obtained.
- Leave the mixture to stand for 1 - 3 minutes.
- Do not add water after mixing.
APPLICATION
Wet method
- Apply 1st coat by brush, float or pump at a rate of 1kg / sq.m.
- Allow a sufficient drying time so that it is not drawn off while applying the 2nd coat. Apply 2nd coat, crosswise at a rate of 1 kg / sq.m
Dry shake method (negative waterproofing)Spread LANKO 202 MATRYX evenly onto the concrete after allowing fresh concrete to achieve initial set at the rate 3 - 3.5 kg / sq.m. Then, Trowel the surface for smooth finish.Dry shake method (positive waterproofing)Spread LANKO 202 MATRYX evenly onto the lean substrate before pouring the fresh concrete at the rate 2 kg / sq.m.CURING TREATMENT
- After LANKO 202 MATRYX coating has harden, cure the treated surface with a light mist of clean water at regular intervals tree times a day for initial two to three days.
- In extremely hot weather curing period may have to be extended to several days.
- On external areas are subjected to heavy rain or harsh sunlight. The finished application should be protected for at least 24 hours.