LANKO 103 SKIMCOAT PLUS โพลิเมอร์พิเศษสำเร็จรูป สำหรับฝ้าและผนังภายในและภายนอก
LANKO 103 SKIMCOAT PLUS โพลิเมอร์พิเศษสำเร็จรูป สำหรับฝ้าและผนังภายในและภายนอกLANKO 103 SKIMCOAT PLUS เป็นโพลิเมอร์พิเศษพร้อมใช้งาน สำหรับงานฉาบบาง เนื้อครีมสีขาว สำหรับปรับระดับผนังภายใน และภายนอกที่ไม่เรียบเสมอกัน ปกปิดรูฟองอากาศขนาดเล็ก ผิวเม็ดทรายรอยแตกลายงา บนผนังปูนฉาบทั่วไป สามารถใช้กับ พื้นผิวทั้งภายนอกและภายใน ผิวที่ได้จะเป็นสีขาวเรียบเนียน
- เนื้อครีมสำเร็จรูปพร้อมใช้งาน
- ให้ผิวที่เรียบเนียนเป็นพิเศษ
- สามารถปล่อยเปลือย หรือทาสีทับได้ โดยไม่ต้องใช้สีรองพื้น
การใช้งานLANKO 103 SKIMCOAT PLUS เหมาะสำหรับใช้งานผนังและฝ้า บริเวณภายในและภายนอกพื้นผิวบริเวณที่ใช้งานสำหรับภายใน / ภายนอก
- คอนกรีตเข้าแบบ
- ผนังคอนกรีตเสริมเหล็ก
- ฝ้าคอนกรีต
- แผ่นผนังคอนกรีตพรีคาสต์
สำหรับภายในเท่านั้น
- บล็อกคอนกรีตมวลเบา (ผสม Lanko 751 กับน้ำ ในอัตราส่วน 2:1 ทาเป็นน้ำยารองพื้นก่อนฉาบ)
- ผนังก่ออิฐ
- บล็อกยิปซั่ม, แผ่นยิปซั่ม
- ยิปซั่ม (ขอคำแนะนำเพิ่มเติมในการใช้งานได้จากแผนกเทคนิค)
วัสดุปิดทับ
- วัสดุปิดทับสังเคราะห์แบบหนา
- สีทาอาคาร
- วอลล์เปเปอร์
- สิ่งทอ
- วัสดุปิดทับประเภทพลาสติกที่มีการยึดเกาะในตัว
คุณลักษณะ/คุณประโยชน์
- เนื้อครีมสำเร็จรูปพร้อมใช้งาน
- ให้ผิวที่เรียบเนียนเป็นพิเศษ
- สามารถปล่อยเปลือย หรือทาสีทับได้ โดยไม่ต้องใช้สีรองพื้น
- ฉาบง่าย ลื่นมือ
- สามารถขึ้นลวดลายได้ด้วยเครื่องพ่น
- ทนต่อแสงยูวี
- ช่วยประหยัดเงินและเวลาในการทาสี
บรรจุภัณฑ์ : 5 กก. / กระป๋อง, 20 กก. / ถังลักษณะของสินค้า/สี : เนื้อครีมสีขาวข้อมูลผลิตภัณฑ์ส่วนประกอบหลักทางเคมี : เรซิ่นสังเคราะห์ สารเติมเต็มและสารผสมเพิ่มอายุผลิตภัณฑ์ : 12 เดือน นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธี ภายในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหายการเก็บรักษา : จัดเก็บในบริเวณที่แห้ง และไม่โดนแสงแดดโดยตรงความหนาแน่น : 1.7 - 1.8 กก. / ลิตรค่าความเป็นกรด-ด่าง : 8 - 10ข้อมูลทางเทคนิคค่ากำลังรับแรงยึดเกาะต่อแรงดึง : ≥ 0.5 MPa ที่ 28 วัน ที่ความหนา 1 มม. (บนพื้นผิวคอนกรีต)ข้อมูลการใช้งานความหนาต่อชั้น : 0.3 - 2 มม.อุณหภูมิแวดล้อม : 10°C - 35°Cระยะเวลาในการรอเพื่อเคลือบทับ : ~24 ชั่วโมงปริมาณการใช้ : 0.5 - 1.5 กก. / ตร.ม. / ความหนา 1 มม.ขั้นตอนการใช้งานการผสม : โพลิเมอร์พิเศษพร้อมใช้งาน ไม่ต้องผสมน้ำเพิ่มการใช้งาน
- ฉาบ LANKO 103 SKIMCOAT PLUS ชั้นแรกด้วยเกรียงฉาบ สแตนเลส หรือพ่นด้วยเครื่องพ่น
- ฉาบอย่างน้อย 2 ชั้น เพื่อให้ได้ผิวที่สวยงามตามความต้องการ
- ทิ้งระยะเวลา 10 - 30 นาที เพื่อป้องกันไม่ให้ผิวที่ฉาบไว้ชั้นแรก หลุดออกระหว่างทำการฉาบชั้นที่ 2
- สามารถใช้กระดาษทรายเพื่อขัดแต่งได้
- ทิ้งระยะเวลาให้แห้ง 24 ชั่วโมง ก่อนทำการตกแต่งด้วยวัสดุปิดทับ

LANKO 103 SKIMCOAT PLUS READY TO USE INTERIOR & EXTERIOR WALL AND CEILING SKIMCOATLANKO 103 SKIMCOAT PLUS is a ready to use skim smoothing rendering, white color paste for levelling uneven interior surfaces and fill-up small bubbles in concrete surface, aggregate effect or hair-line cracks on general rendering. It can be applied on both exterior and interior surfaces. It also gives a very smooth natural white finishing.
- Ready to use paste
- Perfectly white smooth finish
- Can be use as decorative top-coat without painting or paint over with or without primer
UsageLANKO 103 SKIMCOAT PLUS is suitable for wall and ceiling, interior and exterior application.Permissible SubstratesInterior / Exterior
- Shuttered concrete
- Reinforced concrete shell work
- Concrete soffits
- Precast concrete panels
Interior only
- Light-weight concrete block (Apply Lanko 751 mix with water by ratio 2:1 as a primer layer)
- Bricks
- Gypsum block, gypsum board
- Gypsum (Consult Technical Service for further advice in this situation)
Suitable Covering Materials
- Thick synthetic finish coats
- Mineral paint
- Wallpaper
- Fabric
- Bonded plastic coverings
Advantages
- Ready to use paste
- Perfectly white smooth finish
- Can be use as decorative top-coat without painting or paint over with or without primer
- Excellent trowel ability
- Can be applied by spray-machine to create to create a texture rough surface
- UV resistance
- Money and Time saving (less paint may be required).
Packaging : 5 kg/pail, 20 kg/pailColour : White pasteProduct Information Composition : Synthetic resins, mineral filler and admixturesShelf life : 12 months from date of production if stored in undamaged and unopened, original sealed packagingStorage conditions : Store in dry condition and protected from direct sunshineDensity : 1.7 - 1.8 kg/LpH-Value : 8 - 10Technical Information Temsile adhesion strength : ≥ 0.5 MPa at 28 days at 1 mm thickness (on concrete)Application Information Layer thickness : 0.3 - 2 mmAmbient air temperature : +10°C to +35°CWaiting time to overcoating : ~24 hoursConsumption : Approx. 0.5 - 1.5 kg/m2 per 1 mm thicknessApplication stepsMIXING : Ready-to-use paste. No water must be added.APPLICATION
- Apply LANKO 103 SKIMCOAT PLUS 1st coat with stainless trowel or spray.
- A minimum of 2 coats are required to obtain a satisfactory surface.
- Allow sufficient drying time for 10 - 30 minutes so that is not drawn off while applying 2nd coat.
- Use sand paper to obtain a smooth finish.
- Allow 24 hours curing time before applying covering material.