ดร. ฟิคสิท รูฟโค้ท เบอร์ 1 DR. Fixit Roofkote No.1
ดร. ฟิคสิท รูฟโค้ท เบอร์ 1 ( DR. Fixit Roofkote No.1 )
ดร.ฟิคสิท รูฟโค้ท เบอร์ 1 คือ บิทูเมนอิมัลชั่น มีลักษณะข้นเป็นครีมสีน้ำตาลดำ ผสมน้ำได้ มีส่วนประกอบของยาง บิทูเมน สารเคมี ผงแร่ มีความหนืดที่เหมาะสม สำหรับงานทาด้วยแปลงหรือม๊อบ เพื่อให้ความหนา และจะยึดเกาะกับผิวแห้ง หรือผิวที่มีความชื้นได้ดี
ดร.ฟิคสิท รูฟโค้ท เบอร์ 1 ใช้สำหรับงานป้องกันน้ำ เมื่อมีปัญหาเรื่องการรั่วซึมหรือความชื้น ใช้ทาด้วยแปรงโดยมีแผ่น โพลีเอสเตอร์ เป็นตัวเสริมแรงเพื่อให้เป็นแผ่นกันความชื้นและรั่ว – ซึม โดยไม่มีรอยต่อ เพราะแผ่นโพลีเอสเตอร์สามารถ ทาให้สำเร็จเป็นฝืนเดียวกันตลอดทั่วพื้นหลังคา
คุณสมบัติ
- ป้องกันการรั่วซึมบนหลังคา ผนังกำแพง รางน้ำ (คอนกรีต โลหะ กระเบื้องไม้ พลาสติก และอื่นๆ)
- งานไม้ ทาป้องกันผุ
- พื้นห้องเย็น ทาป้องกันความชื้น
- ป้องกันสนิม สำหรับหลังคา กัลวาไนซ์ โลหะ ท่อ และใต้ท้องรถยนต์
- ป้องกันการกัดกร่อนคอนกรีต จากน้ำทะเล
- ทาบนโลหะ หลังคา กัลวาไนซ์ เพื่อช่วยเก็บเสียงดังจากฝนตก
วิธีการใช้งาน1. ทำความสะอาดพื้นผิวให้ปราศจากฝุ่น วัสดุที่หลุดล่อน และรองพื้นด้วยส่วนผสมของ ดร.ฟิสิท รูฟโค้ท เบอร์ 1 และน้ำด้วยอัตราส่วน 1:1 ทิ้งใวให้แห้ง2. ทา ดร.ฟิคสิท รูฟโค้ท เบอร์ 1 ด้วยแปรง และทิ้งใว้ให้แห้งระหว่างชั้น โดยการทาให้แนวตั้งฉากกันกับชั้นที่แล้ว3. สำหรับงานกันรั่วซึมที่ให้ความทนทาน และความยืดหยุ่นตัวสูงสุด ต้องเสริมแรงด้วยแผ่นโพลีเอสเตอร์4. การทาไม่ควรทาทับคอนกรีตที่ร้อนจัด และวันที่มีลมแรงจัด เพราะผิวฟิล์มจะแห้งตัวเร็วมากและ ป้องกันระเหยของน้ำใต้ฟิล์มและเป็นเหตุ ของการบวมพอง5. หลังจากทา ดร.ฟิคสิท รูฟโค้ท เบอร์ 1 ควรป้องกันพื้นผิวไม่ให้สัมผัสกับแสงแดดหรือการกระแทกโดยทาสีทับหน้าหรือปิดทับการกลบดิน หรือเทคอนกรีตทับข้อควรระวัง
- อุณภูมิที่เหมาะสมในการติดตั้งวัสดุกันซึม 5 ถึง 35 °C
- ตรวดสอบความชื้นอากาศและจุดน้ำค้างที่อยู่บนพื้นผิวก่อนติดตั้งวัสดุกันซึม
- ไม่ควรปล่อยวัสดุกันซึมโดยไม่มีวัสดุทับหน้า และไม่ปล่อยวัสดุกันซึม สัมผัสกับแดดโดยตรง โดยไม่มีแผ่น protection board ป้องกัน
- ไม่ควรเดินสัญจรบนวัสดุกันซึม โดยไม่มีวัสดุทับหน้า
- ก่อนติดตั้งวัสดุกันซึมควรซ่อมแซมพื้นผิวให้เรียบ แข็งแรง และตรวจสอบความชื้นพื้นผิวก่อนโดยตรวจสอบท่อระบายน้ำ ท่อแอร์ พื้นผิวที่มีน้ำขัง เป็นต้น
บิทูเมนอิมัลชั่น สำหรับงานป้องกันการรั่วซึม
ขนาดบรรจุ
สีน้ำตาลดำ
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***
*** สามารถติดต่อสอบถาม 083-236-9493 หรือ LINE : @idh4523c ***
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c 

Dr. Fixit Roofkote No.1
Dr. Fixit Roofkote No.1 is a viscous dark brown smooth cream water borne bitumen emulsion, containing bitumen chemical, mineral filler. It is suitable consistency for application in relative thick films by brush or mop and bond firmly to either dry or damp surfaces.Dr. Fixit Roofkote No.1 is used for waterproofing when damp or leakage are problems. It is applied by brush with reinforcement polyester to provide a water and damp proofing membrane without jointing/over lapping because the polyester could achieve complete continuity and integrating all over the roof.Area of Application
- Waterproofing for roof, wall, gutter (concrete, metal, tile, wood, plastic etc)
- Corrosion protection for concrete from sea water.
- Apply on metal or garvulnized roof for sound deadening.
- Rot prevention for wood, timber.
- Apply on metal or garvulnized roof for sound deadening.
Method of Application 1. Clean off all dirt, loose material and prime with dilute Dr.Fixit Roofkote No.1 in proportion with water (1:1) and allow diying 2. Apply Dr.Fixit Roofkote No.1 by brush and allw it to dry between coats.Apply each coat at right angles the previous coat. 3. For roof watarproofing of maximum durabllity and flexibility the canting can be reinforced with polyester. 4. The application should not apply on hot concrete or at strong windy day because the surface film will dry very fast and prevent evaporation of the underneath ahd cause 5. The final application of Dr.Fixit Roofkote No.1 should be protected from sunlight or mechanical damage by painting or using protection boards or backfilling.Limitations & Precautions
- Apply Dr.Fixit Roofkote No.1 when substrate is dry ambient tempratures are 5 to 35 °C
- Check humidity and dew point. Apply Dr.Fixit Roofkote No.1 when surface temperature is at least 5 °C above due point to prevent of water forming on the surface.
- Do not apply to expose reinforcing bars before concrete topping.
- Donot directy heat containers with flame, stove, hot plate or oven. Use airless spray gat high applivation rate.
- Patch and fill all voids and deep depressions in surface with appropriate patching material befroe applying Dr.Fixit Roofkote No.1, Carefully work mateial over irregular concrete to avoid pinholes.
- Before applying Dr.Fixit Roofkote No.1, dam all drains and drain openings.
- Do not leave Dr.Fixit Roofkote No.1 without top coating & do not Dr.Fixit Roofkote No.1 to be contact with direct sunlight without protection boaed install to protevt surface. Dr.Fixit Roofkote No.1 surface cannot be open traffic prior to apply top coat.
A General Purpose Waterproofing Bitumen EmulsionPACKING
COLOR
Category : Waterproofing
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***
*** สามารถติดต่อสอบถาม 083-236-9493 หรือ LINE : @idh4523c ***
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c