ดร.ฟิคสิท ไบค์เลน ทีอาร์ ( Dr. Fixit Bikelane TR )

• Bike & car tire resistant
• > 400,000 cycle abrasion resistant, long lasting
• Quick drying, 1 hour prior to opening to foot traffic, nonskid surface
• Sun, rain & weather resistant
• Adhere on both concrete and asphaltic concrete (bitumen/tarmac) surface
• Water-based, environmentally friendly

 Area of Application :

• Brush/spray concrete, asphaltic concrete (bitumen/tarmac), brick, bitumen mastic flooring
• Bike lane & sport courts; basketball, volleyball, futsal, tennis & multipurpose sport court

• Fresh concrete should be let to cure for at least 28 days for optimum strength. Knock to check for no hollw sounds. Suface must be smooth free of delamination and air bubbles, surface can be smoothen by mechanical means (grinding machine)
• Surface must be dry, moisture not over 10% , clean, free of loose dirty materials, dist, oil stains, wax and concrete curing agent
• For sport cout floor application apply (1:100) slope angle to avoid standing water 
• If concrete surface blisters, if there is hollow sound when knoking concrete surface remove affected area till reaching strong concrete surace. Apply structure repair mortar Dr. Fixit Unirepair FC on hollow area, allow mortar to cure. Sand to smoothen repair concrete surface
• Hairline crack (0.5-1 mm.) croroacking and bug hole and oher surface defects can all be covr by Dr Fixit Bike Lane TR prevening and air bubbtioies fomation
• Old concrete apply Dr.Fixit Denzi Block 2 coats, leave coat dry completely 1-2 hours before apply second coat.

• Throughly stir Dr.Fixit Bike Lane TR prior to application
• Renommend to apply early morning avold high surface temperatures (>40 <) during application
• For 1 coat on concrete or asphaltic concrete (bitumen / tarmac) road apply Dr.Fixit Bike Lane TR
• Brush/roll Dr.Fixit Bike Lane TR at 0.25-0.30 kg/sqm./coat of 300-500 micron dry film thicknss (2-3 coats recommended)
• Allow to each coat to cure 1 hours before next coat, apply each coat perpendicular from each other
• Airless Spray application at 0.25-0.30 kg/sqm./coat of 300-500 micron dry film thickness (2-3 coats recommended)

• Do not mix water into Dr.Fixit Bike Lane TR
• Working temperature 10-35 C
• Avoid applying under sunny weather & hot surface temperatures conditions. Recommend time to apply around before 10 AM or in the evening in Thailand climate conditions
• Concrete surface must be concrete dry with moisture level no more than 10%
• Avoid applying under raining condition. Rain cause surface to be wet & moist slowing  curing time of Dr.Fixit Bike Lane TR, causing air bubbles & delamination
• Do not apply on area of neqative water pressure such as area where water seep through concrete foundation
• Do not apply area regularly immerse in water such as water tank, swimming pool

• Immediately wash equlpment and tools with water after application

• Store in cool area
• keep away from flames
• Avoid long and repeated skin exposure to Dr.Fixit Bike Lane TR
• Avoid inhaling Dr.Fixit Bike Lane TR vapour & mist from spray
• When not using Dr.Fixit Bike Lane TR should close package lid securely Wear respirator, google, protective dothing

 *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***