ดร.ฟิคสิท ซีลโลบอนด์ ไพรเมอร์
DR. Fixit Sealobond Primer
ดร.ฟิคสิท ซีลโลบอนด์ ไพรเมอร์ดร.ฟิคสิท ซีลโลบอนด์ ไพรเมอร์ คือน้้ำยาสำหรับทารองพื้นร่องคอนกรีตประกอบด้วยสารละลาย ยางสังเคราะห์ และเรซิน ใช้สำหรับทาผิวร่องคอนกรีตก่อนที่จะหยอดด้วยวัสดุยารอยต่อคอนกรีตชนิดเทร้อนคุณสมบัติ
- ทำง่าย
- ให้การยึดเกาะที่ดีเยี่ยมกับวัสดุยารอยต่อคอนกรีตประเภทยางมะตอย
ลักษณะการใช้งาน
- ใช้สำหรับทาผิวร่องคอนกรีตก่อนที่จะหยอดด้วยวัสดุยารอยต่อคอนกรีต (ทั้งชนิดเทร้อน และเย็น)
อัตราการใช้* ตามทฟษฎีโดยไม่เผื่อการสูญดสีย
- ประมาณ 0.15 ลิตร/ม ขึ้นอยู่กับความเรียบและรูพรุนของผิวคอนกรีด
วิธีการใช้งาน1. การเตรียมพื้นผิว
- ทำความสะอาดผิวร่องคอนกรีดให้ปราศจากฝุ่น โคลน และคราบน้ำมัน
2. วิธีการทำงาน
- ทา ดร.ฟิคสิท ซีลโลบอนด์ ไพเมอร์ ด้วยแปรงลงบนผิวคอนกรีด และทิ้งให้แห้งประมาณ 30 นาที สำหรับผิวคอนกรีดที่แห้ง และ 90 นาที สำหรับผิวคอนกรีดที่มีความชื้น
- หยอดวัสดุยารอยต่อคอนกรีดตามต้องการ
- อุณหภูมิใช้งาน 0-60 °C
ข้อควรระวังและข้อจำกัด
- ขนาดความกว้างของร่องมากที่สุด 50 มม.
- ไม่ควรผสมวัสดุใดๆลงในผลิตภัณฑ์นี้
อายุและการเก็บรักษาผลิตภัณฑ์
- จัดเก็บได้ 1 ปี ในภาชนะที่ปิดสนิท เก็บในที่ร่มและแห้ง
ความปลอดภัยในการใช้งาน
- น้ำยานี้เป็นสารไวไฟ การเก็บรักษา และการใช้งานต้องห่างจากเปลวไฟ / ประกายไฟในระยะที่ปลอยภัย
- ห้ามสูบบหรี่ในขณะปฎิบัติงาน
- ใช้งานในบริเวณที่มีการถ่ายเทอากาศดี
- กรณีไฟไหม่ให้ใช้คาร์บอนไดออกไซด์ ผงเคมี หรือทรายในการดับไฟ ห้ามใช้น้ำดับไฟ
- ในกรณีเข้าตาให้ล้างด้วยน้ำสะอาดแล้วไปพบแพทย์ทันที
- ในกรณีสัมผัสผิวหนังให้ล้างออกด้วยสบู่
- ปิดฝาภาชนะบรรจุทันทีหลังจากใช้งานเสร็จ ถ้าใช้ผลิตภัณฑ์ไม่หมด
น้ำยารองพื้นร่องคอนกรีตขนาดบรรจุ 3.5 ลิตร , 18 ลิตรสีใสหมวดหมู่ : วัสดุยาแนวรอยต่อ

Dr. Fixit Sealobond Primer
Dr. Fixit Sealobond Primer is a solution for concrete joint surface which composes ofsolvents, synthetic rubber and resin. It has good penetration and excellent adhesion to concrete. Itis applied on concrete joint surface prior to applying joint sealant.Features & Benefits
- Easy apply by brush
- Provide excellent bonding of bituminous joint sealant
Area of Application
- Primer for elastomeric rubber modified bitumen concrete joint sealants. (Hot and cold pour)
Rate of uses* Theoretical consumption without allowance for loss.
- 0.15ltr/m depends on surface porosity
Method of Application1. Surface Preparation:
- Concrete joint surface must be cleaned from dust, mud and oils etc.
2. Application
- Apply Dr.Fixit Sealobond Primer by brush to both side of concrete joint surface and allow drying for about 30 minutes on dry surface and 90 minutes on damp surface.
- Apply sealant into the joints. (See separate datasheet)
- Application temperature 0-60 °C
3. Cleaning
- Use kerosene or mineral turpentine.
Precautions & Limitations
- Maximum width for application in a joint is 50 mm.
- Do not dilute Dr.Fixit Sealobond Primer with water in general application
Sholf Life & Storage
- Maximum 1 year in sealed container kept under shed area.
Health & Safety Precaution
- The solution flammable solvents. Keep away from naked flame, sources of ignition etc.
- No smoking while applying area.
- Use the primer in good ventilated, dry chemical, foam fire estinguisher or sand. use water
- In case of eyes contact, irrigate the eyes with clean water and seek medical attention.
- For skin conact, remove skin contamination with hand clenaner , with with soap and water.
- Seal the container tighty after use.
Primer Of Bitumen Base Joint Sealant For Concrete Substrate
PACKING 3.5 L. , 18 L.COLOR ClearCategory : Sealants