ดร.ฟิคสิท ยูนิรีริช ดับบิวบี
DR. Fixit Unirelease WB
ดร. ฟิคสิท ยูนิรีริช ดับบิวบี
ดร. ฟิคสิท ยูนิรีริช ดับบิวบี เป็นน้ำยาถอดแบบสูตรน้ำ ลดปัญหาการเกิดฟองอากาศในผิวคอนกรีต ใช้ทำแบบหล่อคอนกรีตทุกชนิด น้ำยาจะเคลือบเป็นแผ่นฟิล์มบางระหว่างผิวแบบและคอนกรีตเพื่อป้องกันการเกาะติดคอนกรีตกับแบบหล่อ ซึ่งจะช่วยให้การถอดแบบที่รวดเร็ว สะอาดและง่ายขึน
คุณสมบัติ :
- ดร.ฟิคสทิ ยูนิรีริช ดับบิวบี ช่วยปกป้องพื้นผิวและปกป้องแบบ ได้งานผิวคอนกรีตสวยเรียบเนียน
- ลดปัญหาการเกิดฟองอากาศในผิวคอนกรีต
- ภายหลังการเสร็จสิ้น จะช่วยป้องกันการเกาะติดคอนกรีตกับแบบหล่อเมื่อ ใช้ในอัตราส่วนที่กำหนด
- การใช้งานง่าย เพียงผสมกับน้ำตามปริมาณที่เหมาะสม และใช้แปรงทา
ลักษณะการใช้งาน :
- แบบไม้/แบบไม้อัด
- แบบเหล็ก
- แบบพลาสติก
อัตราการใช้* ตามทฤษฎีโดยไม่เผื่อการสูญเสีย
- กับแบบหล่อไม้ประมาณ 20-35 ตรม./ลิตร และกับโลหะหรือพลาสติก 35 - 50 ตรม./ลิตร
- ปริมาณต่อพื้นที่การใช้งาน จะขึ้นอยู่กับชนิดของแบบหล่อ และสภาพพื้นผิว
วิธีการใช้งาน1. การเตรียมพื้นผิว
- ให้ทำความสะอาดแบบหล่อและแม่พิมพ์ ไม้ เหล็ก ด้วยเศษผ้า เพื่อจัดสิ่งสกปรก และฝุ่นละออง กรณีของพื้นผิวเหล็ก ให้ทำการขจัด สนิมเหล็ก โดยใช้แปรงและผ้าเช็ดทำความสะอาด
- ส่วนซีเมนต์ที่ติดอยู่ให้ทำการขูดออก
2. การทำงาน
- เขย่าผลิตภัณฑ์ให้เข้ากันดีก่อนการใช้งาน
- ดร.ฟิคสิท ยูนิรีริช ดับบิวบี ผสมกับน้ำในอัตราส่วน 1 : 4 (ดร.ฟิคสิท ยูนิรีริช ดับบิวบี : น้ำ)
- ใช้ ดร.ฟิคสิท ยูรีริช ดับบิวบี พ่นหรือทำที่พื้นผิวที่ต้องการ หรือทำด้วยแปรง โดยทาบางๆ บนพื้นผิว
- ก่อนใช้และหลังการใช้แบบหล่อ จะต้องสะอาด หลีกเลี่ยงการใช้งานที่ไม่เหมาะสมซึ่งจะส่งผลกระทบกับแบบหล่อ
- เมื่อใช้ไม้หรือแบบไม้อัด จะต้องมีการเคลือบที่ผิวของไม้ก่อน ก่อนที่จะเทคอนกรีดลงแบบหล่อ
ข้อควรระวังและข้อจำกัด
- ควรสวมใส่อุปกรณีป้องกันความปลอยภัย เช่น เสื้อกราว์น แว่นตา ถุงมือ (ดูรายละเอียดคำแนะนำตามฉลากของผลิตภัณฑ์)
- เมื่อสารเคมีหกกระเด็นถูกผิวหนังหรือตา ให้ล้างด้วยน้ำสะอาดทันที หากกลืนหรือกินผลิตภัณฑ์ไป อย่าทำให้อาเจียนเพราะจะทำให้เกิดอันตราย ควรรีบไปนำส่งพยาบาลทันทีเพื่อให้แพทย์รักษา
- ไม่ควรนำผลิตภัณฑ์นี้ไปทำการเจือจางกับผลิตภัณฑ์อื่นที่ไม่ใช่น้ำซึ่งจะส่งผลให้ประสิทธิภาพของผลิตภัณฑ์ลดลง
อายุการเก็บรักษาและการจัดเก็บ
- อายุการเก็บรักษาเป็นเวลา 24 เดือนนับนับจากวันที่ของการผลิตอยู่ในสภาพที่ไม่มีการเปิดฝา จัดเก็บในที่เย็นและแห้ง (20-40 °C) และไม่ควรสัมผัสกับแสงแดดโดยตรง
ความปลอยภัยในการใช้งาน
- ดร.ฟิคสิท ยูรีริช ดับบิวบี เป็นสารที่ไม่เป็นอันตรายและไม่ไวไฟ หลีกเลี่ยงการสัมผัสผิวหนังและ ดวงตา
- กรณีที่สัมผัสกับผิวหนังหรือตา ให้ทำการล้างออกโดยทันที ลดการระคายเคืองและรีบไปพบแพทย์ทันที
*** น้ำยาถอดแบบสูตรน้ำ
ขนาดบรรจุ |
: 20 ลิตร , 200 ลิตร
|
สี |
: ใส |
หมวดหมู่ |
: ผลิตภัณฑ์น้ำยาและการผสมเพิ่ม |

Dr. Fixit UniRelease WB
Dr. Fixit UniRelease WB is composed of chemically active releasing compound, hydrocarbons, water & additives. It is used as a shutter / mould release agent prior to casting / pouring of concrete because it ensures a smooth and a uniform finish, helps easy removal of shuttering & also shuttering can be used again for casting of fresh concrete.
Features & Benefits :
- De-moulding – Dr. Fixit UniRelease WB reacts with cement to impart excellent release properties to
- treated surfaces.
- Surface finish – Provides excellent smooth, hard & uniform finish to concrete.
- Subsequent finishing – No negative effect on the properties of concrete nor will it impair the
- adhesion of subsequent surface treatments, when applied at the recommended coverage rates.
- Ease of application – It is easy to dilute with water at site & can be applied by brush even byunskilled labour.
Area of Application:
Dr. Fixit UniRelease WB is used as a mould-releasing agent on any formwork such as:
- Plywood
- Metal- steel
- Plastic
- Concrete
Rate of uses* Theoretical consumption without allowance for loss.
- Approximately 20 - 35 m/Liter for woden formwork and 35 - 50 m/Liter for metal or plastic fomworks. Coverage varies depending on surface texture and fromwork or mold.
- Coverage may vary according to the porosity & texture of the aold surface
Method of Application 1. Surface Preparation
- Clean the foms & molds either wood or steel by cotton rags to remove dirt & dush. In Case of seel surface remove rusty scales by wire brushing & wiping ont with cloth.
- Remove any cuementitions material by scraping.
2. Application
- Stir well the matererlal in to its original container by shaking.
- Dr.Fixit Unirelease WB should be added to water in the ratio of 1 : 4(Dr.Fixit Unirelease WB : Water)
- Apply Dr.Fixit Unirelease WB over the clean form surface in very thin layar by spray or fine brush.
- Apply before casting and after stripping of concrete ovan the clean mold. Avodd excessive application to avod wastage.
- Whenenever a new thimber or plywood is used, apply initial spray coat to seal the surface and then apply another coat prior to pouring of concrete.
Precautions & Limtations
- as with all chemucal products, caution should always be exerdised. Protecive clothing, such as gloves and goggles, should be worn (see packaging for specific instructions).
- Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting but call for medical assistance immedlately.
- Do not dilute the material with solvent otherwlse effectiveness reduces.
Shelf Life & Storage:
- Shelf life is 24 months from the dafe of manufacturing in unopened condition. Store at cool & dry place (20-400 °C) and it should not be exposed to direct sunlight.
Health & Safety Precaution
- Dr.Fixit Unirelease WB is non-hazardous & non-flammable material. However it should not come in contact with skin and eyes.
- Avold contact with skin and eyes. In case of contact with skin or eyes, rinse immediately with water. Any specific irritation persists, seek medical attention immediately.
*** Solvent – based Mould release Agent
PACKING |
: 20 L. , 200 L.
|
COLOR |
: Clear |
CATEGORY |
: Admixtures & Concrete Production |