ดร.ฟิคสิท ยูนิรีริช เอสบี
DR. Fixit Unirelease SB
ดร. ฟิคสิท ยูนิรีริช เอสบี
ดร. ฟิคสิท ยูนิรีริช เอสบี เป็นน้ำยาถอดแบบสูตรน้ำมัน ลดปัญหาการเกิดฟองอากาศในผิวคอนกรีต ทำให้ได้ผิวคอนกรีตที่สวยเรียบเนียน
ดร.ฟิคสิท ยูนิรีริช เอสบี ทำปฏิกิริยากับซีเมนต์อย่างดีเยี่ยมช่วยปกป้องพื้นผิวและปกป้องแบบ ใช้ทำแบบหล่อคอนกรีตทุกชนิด น้ำยาจะเคลือบเป็นแผ่นฟิล์มบางระหว่างผิวแบบและคอนกรีตเพื่อป้องกันการเกาะติดคอนกรีตกับแบบหล่อ ซึ่งจะช่วยให้การถอดแบบที่รวดเร็ว สะอาดและง่าย ดร.ฟิคสิท ยูนิรีริช เอสบี จะช่วยป้องกันการเกาะติดคอนกรีตกับแบบหล่อ เมื่อใช้ในอัตราส่วนที่กำหนด
คุณสมบัติ :
- ดร.ฟิคสิท ยูนิรีริช เอสบีช่วยปกป้องพื้นผิวและปกป้องแบบ ได้งานผิวคอนกรีตสวยเรียบเนียน
- เหมาะสำหรับการถอดแบบเหล็ก ไม้ พลาสติก
- ช่วยป้องกันการเกาะติดคอนกรีตกับแบบหล่อ
ลักษณะการใช้งาน :
- แบบไม้แปรรูป
- แบบไม้อัด
- แบบเหล็ก
- แบบพลาสติก
อัตราการใช้* ตามทฤษฎีโดยไม่เผื่อการสูญเสีย
- 30-40 ตรม. ต่อ ลิตร
- ปริมาณต่อพื้นที่การใช้งาน จะขึ้นอยู่กับชนิดของแบบหล่อ และสภาพพื้นผิว
วิธีการใช้งาน1. การเตรียมพื้นผิว
- ผิวแบบหล่อต้องสะอาด ให้ปราศจากคราบน้ำมัน จารบี หรือวัสดุปลอมปนอื่นๆ
2. การใช้งาน
- เขย่าผลิตภัณฑ์ให้เข้ากันดีก่อนการใช้งาน
- ใช้ ดร.ฟิคสิท ยูรีริช เอสบี พ่นหรือทาที่พื้นผิวที่ต้องการ ด้วยแปรง
- ก่อนใช้และหลังการใช้แบบหล่อ จะต้องสะอาด หลีกเลี่ยงการใช้งานที่ไม่เหมาะสมซึ่งจะส่งผลกระทบกับแบบหล่อ
- เมื่อใช่ไม้หรือไม้อัด จะต้องมีการเคลือบที่ผิวของไม้ก่อน ก่อนที่จะเทคอนกรีดลงแบบหล่อ
ข้อควรระวังและข้อจำกัด
- ควรสวมใส่อุปกรณ์ป้องกันความปลอดภัย เช่น เสื้อกราว์น แว่นตา ถุงมือ (ดูรายละเอียดคำแนะนำตามฉลากของผลิตภัณฑ์)
- เมื่อสารเคมีหกกระเด็นถูกผิวหนังหรือตา ให้ล้างด้วยน้ำสะอาดทันที หากกลืนหรือกินผลิตภัณฑ์ไปอย่าทำให้อาเจียนเพราะจะทำให้เกิดอันตราย ควรรีบนำส่งโรงพยาบาลทันทีเพื่อให้แพทย์ปรึษา
อายุการเก็บรักษาเป็นเวลา
- 24 เดือนนับจากวันที่ของการผลิตอยู่ในสภาพที่ำม่มีการเปิดฝา เย็นและแห้ง (20-40 °C) และไม่ควรสัมผัสกับแสงแดดโดยตรง
*** น้ำยาถอดแบบสูตรน้ำมัน
ขนาดบรรจุ |
: 20 ลิตร , 200 ลิตร
|
สี |
: ใส |
หมวดหมู่ |
: ผลิตภัณฑ์น้ำยาและการผสมเพิ่ม |

Dr. Fixit Unirelease SB
Dr. Fixit Unirelease SB is a solvent based mould release agent composed of chemically active release compounds, low viscous hydrocarbons & additives. It is used as a shutter release agent on mould & shutter surfaces prior to pouring & casting of concrete because it ensures a smooth, stain free & uniform surface finish to concrete.
Features & Benefits :
- Dr.Fixit UniRelease SB de-molding agent has no negative effect on the properties of concrete
- Can be applied on any formwork such as concrete, timber, plywood, plastic metal etc.
- Excellent release properties to the treated surface
- Dr.Fixit UniRelease SB de-molding agent has no negative effect on the properties of concrete.
Area of Application :
Applicable on any type of form surfaces such as
- Plywood
- Metal- steel
- Plastic
- Concrete
Method of Applilication
- Forms should be clean and rut free.
- Stir well before the application. Apply Dr.Fixit UniRelease SB De-molding Apply before casting & after stripping &cleaning the mould. Excessive application should be avoided, as it is seff-migrating
- Whenever a new timber or plywood is used there should be an initial spray coat to seal the new timber then a second coat should be applied prior to the filling of the mould
Rate of Uses* Theoretical consumption without allowance for loss.
Precautiobs & Limitations
- As with all chemkal products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn
- Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidantally swallowed, do not induce vomiting, but call for medical asslstance immediately
Storage
- 24 mouth (when stored away from sunligt and high temperature)
*** Solvent-based Mouldrelease Agent
PACKING |
: 20 L. , 200 L.
|
COLOR |
: Clear |
CATEGORY |
: Admixtures & Concrete Production |