ดร.ฟิคสิท เบคกิ้ง ร็อค
DR.Fixit Backing-Rod
DR.Fixit Backing-Rod
ดร. ฟิคสิท เบคกิ้ง ร็อค
ดร. ฟิคสิท เบคกิ้ง ร็อค เป็นวัสดุรองรับและปรับระดับความลึก ของวัสดุยาแนว ซึ่งเป็นโฟมประเภทโพลีเอธีลีน ชนิดเส้นกลม ซึ่งมีขนาดและความยาวต่าง ๆ กัน
ใช้อุดร่องเพื่อปรับระยะความลึกของร่อง เพื่อป้องกันการยึดติดกับพื้นร่อง (ยึดติด 3 ด้าน) ก่อนอุดยาแนวด้วยซีลแลนท์
ลักษณะการใช้งาน :
- รอยต่อเพื่อการขยายตัว รอยต่อเพื่อการก่อสร้าง
- ปิดรอยแตกร้าวที่ไม่มีการเคลื่อนตัว
- ใช้อุดร่องเพื่อปรับระยะความลึกของร่อง
- โฟมเส้นอุดร่อง ชนิดโพลีเอธีลีน
วิธีการใช้งาน1. การเตรียมพื้นผิว
- ดร.ฟิคสิท เบคกิ้ง ร็อก ไม่จำเป็นต้องมีการเตรียมเป็นพิเศษ เพียงแต่ต้องเตรียมพื้นผิวของวัสดุร่องหรือรอยต่อต้องแห้งสะอาด ไม่มีเศษสิ่งสกปรกที่หลุดล่อนได้ง่าย ฝุ่นผง คราบน้ำมัน แว็กซ์ น้ำยาบ่มคอนกรีด ผิวที่หลุดหรือรอยแตกบิ่น ต้องทำการซ่อมแซมด้วยวัสดุที่เหมาะสม เช่น ปูน ซ่อมแซมโครงสร้าง และทิ้งไว้ให้แห้ง ก่อนทำงานในขั้นต่อไป
2. การทำงาน
- นำ ดร.ฟิคสิท เบคกิ้ง ร็อค ใส่ลงไปในร่องให้มีขนาดความลึกที่กำหนด และตรวจจะต้องโต กว่าขนาดความกว้างของร่องที่ออกแบบไว้
- เมื่อใช้ ดร.ฟิคสิท เบคกิ้ง ร็อค ต้องระวังที่จะไม่ให้ผิวถูกตัด หรือถูกกดทับ และระหว่างการทำงานต้องหลีกเลี่ยงการดึงที่ยาวมากเกินไป
อายุและการเก็บรักษาผลิตภัณฑ์
- ไม่เกิน 1 ปี เก็บในที่ร่มและแห้ง
ความปลอดภัยในการใช้งาน
- ไม่เป็นพิษและไม่ส่งผลต่อสุขภาพ
*** โฟมเส้นอุตร่อง ชนิดโพลีนเอธีลีน
ขนาดบรรจุ |
: ขนาดเส้นผ่านศูนย์กลาง 6-50 มม. ความยาว 100 ม. / 50 ม. / 2 ม.
|
สี |
: ไม่ระบุ |
หมวดหมู่ |
: วัสดุยาแนวรอยต่อ |

DR.Fixit Backing-Rod
Description :
Dr. Fixit Backing Rod is closed cell circular cord polyethylene foam for use as a backup material of joint sealing application, to make sure applied correct width to depth ratio. Dr. Fixit Backing Rod also use as bond breaker at base side of joint for preventing three sided adhesion.
Area of Application :
- Construction & Expansion Joint
- Use as bond breaker at base side of Joint
- Use as back up material for control correct width to depth ratio
Method of Application1. Surface Preparation
- Generally Dr.Fixit Backing Rod is not necessary for any special preparation before installation. Most of sealing material need to prepare joint surface before application
- Joint Surface to be applied sealing material should be clean from dust, oil grease, laitance and any loosing material, that will effect bonding between sealant & Joint
2. Application
- Dr.Fixit Backing Rod install to prepared joint by push fitting in to joint. with measure depth of joint for control width & Depth ratio
- In some case blunt tool should be use for installation of Dr.Fixit Backing Rod and to acod damage the skin Dr.Fixit Backing Rod
Shelf Life & Storage
- Shelf life is 12 mouths, store in cool and dry condition, and keep away from heat sources
Health & Safety Precaution
- No health hazards associated with Dr.Fixit Backing Rod in normal use
*** CLOSE CELL PE FOAM FOR JOINT SEALANT BACK UP Rod
PACKING |
: Diameter 6-50 mm. Lenght 100 m. / 50 m. / 2 m. |
COLOR |
: Not Specify
|
CATEGORY |
: Sealants |