จระเข้ วอลล์ จ้อยท์ มอร์ตาร์
Crocodile Wall Joint Mortar
จระเข้ วอลล์ จ้อยท์ มอร์ต้าร์Crocodile Wall Joint Mortar
- มอร์ตาร์สําหรับผสานยึดติดและฉาบเก็บรอยต่อผนังมวลเบาสําเร็จรูป
- แรงยึดเกาะสูง หดตัวตํ่า ช่วยเพิ่มความแข็งแรงให้ผนัง
- ลดปัญหาการเกิดรอยแตกร้าวบริเวณรอยต่อระหว่างแผ่น
ลักษณะการใช้งานจระเข้ วอลล์ จ้อยท์ มอร์ตาร์ เหมาะสำหรับงานเชื่อมรอยต่อผนังสําเร็จรูป ใช้ได้ทั้งผนังมวลเบาสําเร็จรูป ผนังคอนกรีตมวลเบา ซีเมนต์ผสมโฟมสีของผลิตภัณฑ์ : สีเทาขนาดบรรจุ : 20 กิโลกรัม/ถุงข้อมูลสินค้าจระเข้ วอลล์ จ้อยท์ มอร์ตาร์ มอร์ตาร์สําหรับงานเชื่อมรอยต่อผนังสําเร็จรูป ใช้สําหรับยึดติด และฉาบเก็บรอยต่อระหว่างแผ่นได้อย่างมีประสิทธิภาพ มีคุณสมบัติให้แรงยึดเกาะสูง หดตัวตํ่า ช่วยเพิ่มความแข็งแรงให้ผนัง ลดปัญหา การเกิดรอยแตกร้าวบริเวณรอยต่อระหว่างแผ่น เหมาะสําหรับผนังซีเมนต์ผสมโฟม ผนังคอนกรีตมวลเบา และผนังมวลเบาสําเร็จรูป ประเภทอื่น ๆ เป็นต้น
การเตรียมพื้นผิว
- ทําความสะอาดพื้นผิวก่อนใช้งานให้ปราศจากสิ่งสกปรก ฝุ่น นํ้ามัน และสิ่งแปลกปลอมต่าง ๆ
- กรณีผนังคอนกรีตมวลเบา ผนังอิฐมวลเบา และผนังที่ผลิตจาก วัสดุที่มีอัตราการดูดซึมนํ้าสูง ควรพรมนํ้าบริเวณสันรอยต่อให้หมาด ๆ ก่อนทํางาน เพื่อลดการเกิดรอยแตกร้าวอันเนื่องจากสาเหตุพื้นผิวดูดซึมนํ้าจากผลิตภัณฑ์
- กรณีผนังซีเมนต์ผสมโฟม ควรใช้ทินเนอร์ AAA ทาที่พื้นผิว บริเวณสันรอยต่อ เพื่อเพิ่มแรงยึดเกาะให้ดียิ่งขึ้น
อัตราส่วนผสม
- นํ้า : จระเข้ วอลล์ จ้อยท์ มอร์ตาร์ 1 : 2.5-3 ส่วน (โดยปริมาตร) หรือ
- นํ้า 4 ลิตร : จระเข้ วอลล์ จ้อยท์ มอร์ตาร์ 1 ถุง (20 กก.) (โดยน้ำหนัก)
วิธีการผสม
- ผสมผลิตภัณฑ์ จระเข้ วอลล์ จ้อยท์ มอร์ตาร์ กับนํ้าตามอัตราส่วน ผสมให้เข้ากันด้วยเครื่องผสมไฟฟ้าที่ความเร็วรอบตํ่าประมาณ 150 รอบต่อนาที (150 rpm)
- ทิ้งไว้เพื่อให้เคมีบ่มตัวประมาณ 15 นาที จึงกวนซํ้าอีกครั้ง ก่อนนํามาใช้งาน อย่าเติมนํ้าหรือมอร์ตาร์ลงไปเพิ่มหลังจากที่ทิ้งไว้จนเคมีบ่มตัวแล้ว
วิธีการทํางานการใช้งานเพื่อเชื่อมบริเวณรอยต่อระหว่างผนังมวลเบา กับโครงสร้าง
- ใช้เกรียงก่อผลิตภัณฑ์ จระเข้ วอลล์ จ้อยท์ มอร์ตาร์ ลงบนบริเวณ พื้นผิวของโครงสร้าง เช่น พื้น และคาน รวมทั้งฉาบผลิตภัณฑ์ จระเข้ วอลล์ จ้อยท์ มอร์ตาร์ ลงบนบริเวณสันขอบผนังมวลเบา สําเร็จรูป ปรับให์มีความหนาประมาณ 5-7 มิลลิเมตร จากนั้นนําผนัง ประกบเข้ากับโครงสร้าง ใช้เกรียงปาดเก็บปูนส่วนเกิน
การใช้งานเพื่อเชื่อมบริเวณรอยต่อระหว่างผนังมวลเบา
- ใช้เกรียงฉาบผลิตภัณฑ์ จระเข้ วอลล์ จ้อยท์ มอร์ตาร์ ลงบนบริเวณ สันขอบผนังมวลเบาสําเร็จรูป ปรับให้มีความหนาประมาณ 5-7 มิลลิเมตร จากนั้นนําผนังประกบเข้ากัน ใช้เกรียงปาดเก็บปูนส่วนเกิน
การฉาบเก็บรอยต่อรอย
- ใช้เกรียงฉาบผลิตภัณฑ์ จระเข้ วอลล์ จ้อยท์ มอร์ตาร์ ลงบนบริเวณ รอยต่อ ป้ายปรับแต่งให้เรียบ จากนั้นบ่มนํ้าอีกครั้งเพื่อลดการเกิด รอยแตกร้าว

Crocodile Wall Joint Mortar
- Can be used for installation lightweight wall panel.
- Good adhesion, enhance strength on the lightweight wall panel.
- Low shrinkage, reduce the cracking problem.
Color : Grey powderPacking : 20 kg/bagInformationCrocodile Wall Joint Mortar Adhesive mortar for lightweight wall system. It provides good adhesion, enhance strength on the lightweight wall panel. Low shrinkage, reduce the cracking problem at the joint area between sheet. Can be used for filling small holes and fissures. It designed for installation of EPS-Cement wall panel, light weight aggregate concrete wall panel, light weight concrete wall panel and etc.
Substrate Preparation
- The substrate must be cleaned. Free from loose particle. Dirt, dust, any oils, other impurities or foreign materials must be removed.
- In case the installation of light weight aggregate concrete wall panel, light weight concrete wall panel and any high-water absorption material. Recommend to damp onto the side of panel before apply adhesive mortar, to reduce water absorption of material cause cracking problem.
- In case the EPS-Cement wall panel. Recommend to apply Thinner AAA onto the side of panel before apply adhesive mortar, to enhance the bonding properties.
Mixing RatioWater : Crocodile Wall Joint Mortar = 1 : 2.5-3.0 by volumeor water 4 liter per Crocodile Wall Joint Mortar 1 bag (20 kg)Mixing Method
- Mix Crocodile Wall Joint Mortar with water. Stir with slow speed electric mixer (< 150 rpm) till homogeneous.
- Leave for cure 15 minutes and stir second time. Do not add more water / Crocodile Wall Joint Mortar after allow curing.
Application MethodAdhesive for panel to structure.
- Damp the surface by water. Laying by place a layer of Crocodile Wall Joint Mortar by trowel along the footing or ceiling. Apply 5-7 mm of Crocodile Wall Joint Mortar by trowel onto the side end of the panel. Place the panel gently in line with the laying of Crocodile Wall Joint Mortar. Remove excess by trowel.
Adhesive for panel and panel.
- Apply 5-7 mm of Crocodile Wall Joint Mortar by trowel onto the side end of the panel. Place the panel gently onto the previous panel. Remove excess by trowel.
For gap filling
- Filling the Crocodile Wall Joint Mortar by trowel onto the joint or gap. Smooth the surface. Damp the surface by water to avoid micro crack.