Resistant to water pressure, temperature, excellent bond strength
Resistant to swimming pool chemical agents
Fast setting, ready to fill water after applied 24 hours
Anti-black mold and algae with Microban
Joint width 2-15 mm
Colors : 9 Packing : 1 Kg / bag
Information Crocodile Platinum is made from Portland cement, selected sand, and special additives.
Installation Joint width should be between 2-15 mm and depth should not be less than 2/3 of tile thickness. Recommend to apply tile grout 48 hours after tile installation. Preparation Clean and remove any dirt or contaminations remaining in the joints. Make sure the joints are clean and dry before grouting. Mixing Mix 1 kg of grout powder with 0.23 liters of clean water, or 4 parts grout to 1 part water (by volume).Add the grout into the water and mix well by hand or low speed drill. Do not add water or grout after this point. Discard grout when too stiff to work, about 20 minutes. Application Fill the joints with well mixed grout, then using a rubber face trowel diagonally across the grout joints. Remove all excess grout with the trowel and leave until curing. Clean tile surfaces with wet sponge and clean cloth. Curing
Care should be taken within 72 hours to prevent the grout from drying out or dirt by covering the installation with natural Kraft paper (Plastic or newspaper sheet should not be used).