MARTON โม่ผสมปูนฉาบ 1 ถุง ขนาด 180 ลิตร พร้อมฝา (ไม่รวมมอเตอร์)

Features

• Detachable stirring set
• Save time mixing.
• The stirring shaft is made of deformed steel, durable and strong.
• with cooling holes for motor
• There is a breaker to control the operation system.
• Strong, durable, can be used for a long time

general properties

 Mortar mixer, model 1 bag, Premium (CMTT1-Premium) Mortar Mixer, new look!!

• Suitable for mixing mortar or plaster Stirring other ingredients The stirring shaft is made of deformed steel that is strong and durable. Comes with all 3 stirring blades, making it better to stir the ingredients. And has applied scientific principles to design products to meet the needs of users perfectly and cost-effectively 

product details

• technical data
•  Mortar mix size 1 bag (180 liters)
•  Product size (Width x Length x Height) 800 x 1300 x 880 cm.
•  The diameter of the mill basin is 750 cm.
•  Depth size of the mill basin 410 cm.
•  Number of stirring blades 3 arms 3 stirring blades
•  The working system uses a gear to drive the stirring blade in mixing.
•  Operation control system breaker 30 A
•  Belt size B 54
•  Motor pulley size 2.5 inches
•  Used in conjunction with a 3 hp motor.
• Electricity 220 volts
•  Wheel type size, alloy wheels 10 inches
•  Ground wire There is 1 ground wire.
•  Weight without motor 117 KG.
•  Cover 7 KG.
•  No-load speed 50-52 rpm

material

installation

•  Before use, check the power cord for tearing or not.
•  Keep the machine level and balanced.
•  Check the machine mount nut whether it is ready to use or not
•  Check the stirring blades for stone debris. Jam the leaves?
•  Check the grease on the drive gear for presence or not.

• Put the pulley on the motor and wedge it. and tighten the nut
• Set up a plaster mill. keep the handle on top
• Remove the cover fixing nut. top bonnet removed and lift the top bonnet off
• Lift the motor, place it on the motor stand and put the nut fixing the motor base to the motor stand, but do not tighten the nut yet.
• Align the motor to see if the motor pulley groove and the mixer pulley groove match.
• if match Tighten all bolts
• The belt adjusting nut is located at the bottom. motor mount plate
• Adjust the tension belt by tightening the nut for adjusting the motor base. which is located at the bottom of the motor base plate

Precautions for use

•  should not be placed on strong impact Once the motor is installed
•  Do not use any part of the body protruding into the basin while where the mortar mixer is working
•  Clean the machine after every use.
•  Do not use a hammer to knock on the wall of the mill to remove cement debris.
•  Check the power cord before and after every use.
•  Do not allow the grease to dry out. Because it may cause the drive gear to wear out and cause damage.