WEL-D เครื่องเชื่อม MMA 200 แอมป์ รุ่น MMA 200D

Features

• VRD Function reduces the voltage in front of the machine while not welding. To prevent electric shock welders
• Anti Stick cuts off the welding current as soon as the welding wire sticks to the workpiece.
• Able to weld continuously Smooth & Stable using welding wire 1.6-3.2 mm.

• The stability of the continuous welding current is good without interruption Smooth & Stable

• Cut off the welding current immediately. When the user connects the wire to the workpiece or accidentally

• The machine can be welded by simply touching the tungsten tip to the welding piece. Make welding easy (not suitable for point work or tag work)

• Continuous operation Duty cycle 35% at maximum welding current

• Iron/Steel , Aluminum/Aluminum , Stainless/Stainless

general properties

• Provide high welding current according to specification
• Provide stable welding of continuous welding current, good constant, no interruption.
• Product quality control 100% QC before delivery to customers.
• All products pass quality inspection standards for safety.
• Connector Welpro threaded connection cable joints are more firmly connected.
• Better reduce heat, the connection point affects the device inside the machine is not damaged.
• Spare parts are available after sales service. 
• Product quality warranty for 1 year

product details

• Product model MMA200D 
• Input Voltage/Frequency (Volt) Inverter - Single Phase Minimum and Maximum Welding Current (Amp) 10-160A 
• 35% working capacity 
• Maximum input current 7.48KVA/34
• No-load voltage 82V/14VRD 
• Electrical coefficient 0.85 
• Efficiency 87% 
• Welding wire size 1.6-4.0 mm. 
• Insulation class F 
• Degree of protection against foreign objects IP21S 
• Machine size 13.5x30x21.5 cm. 
• Machine weight 3.45 kg. 
• 1 year warranty 
• Box size 26x37x28 cm. 
• Total box weight 5.34 k

Precautions for use

• Check operation of the cooling fan. at least once a week
• Check the condition of the power cord, welding gun cable, welding cable, ground cable, and connectors at least. once a week
• Blow clean the unit with clean compressed air free of moisture, water, and dust every week or less. which depends on the environment in which the machine is used
• Do not use compressed air greater than 5 Bar to clean the unit.
• If the machine is not used for a long time Should be stored in a sealed box and stored in an area that is not damp. 
• Welding light, heat and welding fumes can cause a fire.
• Should wear a mask and safety equipment for the safety of users.
• Should study the manual before use.