ปูน TPI-M-400(ปูนปรับระดับ)50Kg.

Features

• It is a finished leveling mortar product. Suitable for use in pouring floors The mortar has a consistent consistency. There are chemicals that help to flow well. Makes leveling the floor easier provide high strength

product details

• Used for pouring and leveling concrete floors. The thickness can be adjusted from 4 -5 centimeters in order to level the floor to be consistent before further preparation, such as tiling, parquet, laminate, etc. It can be poured and adjusted to the surface as well. rough polishing or sprinkle powdered cement to polish it Or used in imprinted concrete work, 1 bag can be poured, leveling 0.022 cubic meters

Usage

1.  Clean the surface area to be poured. By removing dirt, water stains, oil stains, dust and anything that affects adhesion completely. If the surface of the substrate is not strong enough, it should be extracted. until confident that the surface is strong or prepare by other suitable methods (Check the surface preparation by using a steel scraper on the surface. There must be no crumbling parts. or parts that can easily be scraped off with an iron) before pouring, pour water to saturate While pouring, there should not be water. or there is water seeping up from the floor all the time If there is, the above problems must be resolved first.
2. Mix the ready-made leveling mortar M400 with clean water, the ratio of 1 bag of 50 kg of mortar uses 7-8 liters of water (140 ml - 160 ml per 1 kg of M400 mortar). Mix until homogeneous. Do not leave a lump of cement that is not yet mixed with water.
3. Apply to use according to the general floor leveling steps. It can also be used with a mortar machine. The work area should be protected by appropriate methods from being exposed to water droplets or sunlight while pouring and until the mortar is fully set.
4. after the floor has dried Incubate with suitable methods for at least 3-7 days.