ปูน TPI M-300(ปูนก่อสำเร็จรูป)

Features

• TPI M300 dry type mortar is used for building interior and exterior walls of buildings above ground level such as brick walls or concrete blocks. (except lightweight block) improves adhesion ability. Makes it easier to build walls It is still strong according to TIS 598-2547 standards.

general properties

• Dry masonry mortar Used for building walls inside and outside buildings above ground level, such as brick walls or concrete blocks. (except lightweight blocks)
• contains a mixture of raw materials
  • TPI Portland Cement Type 1 according to ASTM C-150 and TIS.15 Volume 1-2555
  • Fine Crushed Limestone undergoes the process of drying and sizing up to 2 times.
  • High quality chemicals from abroad There is an increase in adhesion, making the walls stick together well. have more strength
• increase the adhesion force, making it sticky The walls stick together well. have more strength
• To use, just mix with water to meet the specified proportion, it can be used immediately.
• Product standard TIS 598-2547 dry type mortar (type 50)
• Packing size 50 kg./bag
• white-purple bag

product details

technical data

• Mixing ratio: 1 bag uses 9 liters of water.
• Amount of space to be used per 1 bag of mortar (50 kg.) at a thickness of 15 mm.
  • Masonry bricks (6 x 14 x 3 cm.) can produce an area of 1.15 sq.m. / amount of use per sq.m. 43.48 kg.
  • Mon hole bricks (6.5 x 16 x 4 cm.) can produce an area of 1.25 sq.m. / amount of use per sq.m. 40 kg.
  • Concrete block (39 x 19 x 7 cm.) can produce an area of 2 sq.m. / amount of use per sq.m. 25 kg.

material

usage

Method of skin preparation and application

• Pour water over bricks or concrete blocks to be moderately moist.
• Mix TPI M300 mortar with clean water 4.5:1 by volume.
• Mix together until homogeneous.
• Apply to use according to the general construction process. It can also be used in conjunction with Mortar Machine.
• after mixing with water It should be used up within 2 hours and 30 minutes.

Precautions for use

• Clean and pour water on the wall surface to be plastered to be moderately moist.
• Mix TPI mortar (M300) with clean water 4.5 : 1 by volume.
• Mix together until homogeneous.
• Apply to use according to the general construction process. It can also be used in conjunction with Mortar Machine.