Sika® MultiSeal AP เทปกาวกันซึม สำหรับปิดรอยต่อและรอยแตกร้าว ประเภทบิทูเมน
Sika® MultiSeal APเทปกาวกันซึม สำหรับปิดรอยต่อและรอยแตกร้าว ประเภทบิทูเมนSika® MultiSeal AP เป็นเทปกาวสำเร็จรูป ชนิดมีแถบกาวในตัว ประกอบด้วยสารบิทูเมนผสมยางดัดแปลง เคลือบด้วยแผ่น อลูมิเนียมฟอยล์
- ใช้งานง่าย
- ยึดเกาะได้ดีกับพื้นผิวหลายประเภท
- ทนต่อทุกสภาพอากาศ
การใช้งานSika® MultiSeal AP เป็นผลิตภัณฑ์ที่พัฒนาและออกแบบมา เพื่อใช้สำหรับปิดทับรอยแตกร้าว ปิดรอยต่อต่างๆ และ ชิ้นส่วนประกอบอื่นๆ เพื่อป้องกันน้ำซึมผ่าน คุณลักษณะ/คุณประโยชน์
- ใช้งานง่าย
- ยึดเกาะได้ดีกับพื้นผิวหลายประเภท
- ทนต่อทุกสภาพอากาศ
- สามารถยึดเกาะได้ดีกับพื้นผิวที่เป็นยางสังเคราะห์ประเภทบิทูเมน
- สามารถทาสีทับได้
- ใช้งานได้ดีในอุณหภูมิที่ต่ำ
บรรจุภัณฑ์
ขนาดความยาวของม้วน |
ขนาดความกว้างของม้วน |
จำนวนม้วนต่อกล่อง |
3 เมตร |
50 มิลลิเมตร |
24 |
3 เมตร |
100 มิลลิเมตร |
12 |
3 เมตร |
250 มิลลิเมตร |
4 |
10 เมตร |
300 มิลลิเมตร |
1 |
10 เมตร |
1000 มิลลิเมตร |
1 |
ลักษณะของสินค้า/สี : สีเทาด้าน สีแดง (Terracotta)ข้อมูลผลิตภัณฑ์ ่ส่วนประกอบหลักทางเคมี : เทปยางบิทูเมนดัดแปลงอายุผลิตภัณฑ์ : 72 เดือน นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธี ภายในบรรจุภัณฑ์ที่ปิดสนิท และไม่เสียหายการเก็บรักษา : จัดเก็บในบริเวณที่แห้ง และไม่โดนแสงแดดโดยตรง ที่อุณหภูมิ +5°C ถึง +25°Cความหนา : 1.1 มิลลิเมตร โดยประมาณข้อมูลการใช้งานอุณหภูมิแวดล้อม : +5°C ถึง +45°C , 3°C เหนืออุณหภูมิจุดน้ำค้างขั้นตอนการใช้งานการเตรียมพื้นผิว : Sika® MultiSeal AP มีแรงยึดเกาะดีกับพื้นผิวที่แห้ง สะอาด และแข็งแรง โดยไม่ต้องลงน้ำยารองพื้นก่อน และเพื่อให้ได้ประสิทธิภาพที่ดี ให้ปฏิบัติตามขั้นตอนดังนี้พื้นผิวที่ไม่มีรูพรุนพื้นผิวประเภทโลหะ พลาสติก และกระเบื้องเคลือบ ให้ทำความสะอาด และเตรียมพื้นผิวโดยการทา Sika® Aktivator-205 บนพื้นผิว ด้วยผ้าสะอาดก่อน ปล่อยทิ้งไว้ให้แห้งเป็นระยะเวลาอย่างน้อย 15 นาที (ไม่เกิน 6 ชั่วโมง) พื้นผิวที่มีรูพรุนพื้นผิวประเภทคอนกรีต คอยกรีตมวลเบา ปูนฉาบ มอร์ต้า และอิฐก่อ ปูนฉาบ ต้องลงน้ำยารองพื้นประเภทบีทูเมน (เช่น SikaProof® Membrane) โดยใช้แปรงทา และปล่อยทิ้งไว้ให้น้ำยารองพื้นแห้ง เป็นระยะเวลาอย่างน้อย 1 ชั่วโมง ก่อนติดตั้ง Sika® MultiSeal APการทำความสะอาดเครื่องมือและอุปกรณ์ : ทำความสะอาดเครื่องมือทุกชนิด และอุปกรณ์ต่าง ๆ ทันทีด้วย Sika® Remover-208

Sika® MultiSeal APBituminous Sealing TapeSika® MultiSeal AP is a self-adhesive, rubber modified bituminous sealing tape laminated with an aluminium foil on the upper side.
- Very easy to apply
- Good adhesion to many substrates
- Weather proof
Usage Sika® MultiSeal AP is designed for sealing and repairing applications against water ingress on roofs and any other building element. Advantages
- Very easy to apply
- Good adhesion to many substrates
- Weather proof
- Self-adhering
- Compatible with bituminous substrates
- Can be over-painted
- Can be applied at low temperatures
Packaging
Length per roll |
Tape width |
Rolls per box |
3 m |
50 mm |
24 |
3 m |
100 mm |
12 |
3 m |
250 mm |
4 |
3 m |
300 mm |
4 |
10 m |
300 mm |
1 |
10 m |
1000 mm |
1 |
Colour : Matt grey, TerracottaProduct Information Composition : Rubber modified bituminous tapeShelf life : 72 months from date of production If stored properly in undamaged, original, sealed packaging.Storage conditions : Store in dry and cool conditions, protected from direct sunlight at temperature between +5°C and +25°C.Thickness : 1.1 mm approx.Application Information Ambient air temperature : +5°C to +45°C, min. 3°C above dew point temperatureApplication stepsSika® MultiSeal AP generally has strong adhesion without primers/activators to most dry, clean and sound substrates. For optimum the following procedure shall be followed:Non porous substrates :Metals, plastics, coated surfaces and glazed tiles have to be cleaned and pre-treated with Sika®Aktivator-205 by using a clean towel. Before sealing allow a flash-off time >15 min (max.6 hours).Porous substrates :Concrete, aerated concrete and cementitious plasters, mortars, brick, etc. have to be primed with a bituminous primer (e.g. SikaProof® Membrane) by using a brush. Before applying Sika® MultiSeal AP allow a flash-off time > 1 hour.SUBSTRATE PREPARATIONCLEANING OF EQUIPMENT : Clean all tools and application equipment with Sika® Remover-208.