Sika® Padding Mortar มอร์ตาร์อัดแห้งสำหรับงานปรับระดับ
Sika® Padding Mortarมอร์ตาร์อัดแห้งสำหรับงานปรับระดับSika® Padding Mortar เป็นซีเมนต์มอร์ตาร์ผสมเสร็จ ซึ่งออกแบบ ให้เป็นส่วนผสมแบบอัดแห้งเหมาะสำหรับ การใช้งานโดยผู้เชี่ยวชาญใน การปรับระดับฐานเครื่องจักรก่อนทำการเกร้าท์
- ใช้งานง่าย เพียงแค่ผสมกับน้ำสะอาดเท่านั้น
- ให้กำลังอย่างรวดเร็ว ทำให้สามารถทำการติดตั้งอุปกรณ์ เครื่องจักร ต่างๆ ได้อย่างเร็ว
- เที่ยงตรงและประหยัด เนื่องจากทำการผสมเสร็จพร้อมใช้จากโรงงาน
การใช้งานSika® Padding Mortar ใช้สำหรับงานหล่อแท่นปูน เพื่อการหนุน ตั้งระดับแผ่นฐานเสา หรือแผ่นฐานเครื่องจักรต่างๆ คุณลักษณะ/คุณประโยชน์
- ใช้งานง่าย เพียงแค่ผสมกับน้ำสะอาดเท่านั้น
- ให้กำลังอย่างรวดเร็ว ทำให้สามารถทำการติดตั้งอุปกรณ์ เครื่องจักร ต่างๆ ได้อย่างเร็ว
- เที่ยงตรงและประหยัด เนื่องจากทำการผสมเสร็จพร้อมใช้จากโรงงาน
- ปราศจากคลอไรด์ องค์ประกอบช่วยให้การพัฒนาความแข็งแรงสูง ในช่วงต้นโดยไม่ต้องใช้คลอไรด์
- ไม่หดตัว ทำให้ไม่สูญเสียค่าการยึดเกาะกับผิวเดิม
บรรจุภัณฑ์ 25 กก./ถุงลักษณะของสินค้า/สี : ผงซีเมนต์สีเทาข้อมูลผลิตภัณฑ์ อายุผลิตภัณฑ์ : 6 เดือน นับจากวันที่ผลิต หากจัดเก็บอย่างถูกวิธีภายในบรรจุภัณฑ์ที่ปิดสนิทและไม่เสียหายการเก็บรักษา : จัดเก็บให้อยู่ในบริเวณที่แห้ง ไม่ถูกแสงแดดโดยตรงความหนาแน่น : 2 กก. / ลิตรข้อมูลทางเทคนิคค่ากำลังรับแรงอัด
เวลา |
ค่ารับกำลังอัด (MPa) |
6 ชั่วโมง |
7 |
10 ชั่วโมง |
25 |
12 ชั่วโมง |
30 |
1 วัน |
40 |
3 วัน |
55 |
28 วัน |
70 |
ขั้นตอนการใช้งานข้อแนะนำการใช้งานการผสม : Sika® Padding Mortar 1 ถุง (25 กก.) ใช้น้ำปริมาณ 2.5 - 2.75 ลิตร สัดส่วนอัตราการผสมนี้ควรทำการชั่งตวงให้เที่ยงตรงทุกครั้ง ค่อยๆ เท Sika® Padding Mortar ลงผสมและกวนให้เข้ากันจนได้ความข้นเหลว ที่ต้องการ แนะนำให้กวนผสมด้วยเครื่องผสมเพื่อให้ส่วนผสมที่เป็นเนื้อ เดียวกันการใช้งาน : การติดตั้งแบบจะต้องแน่นและแข็งแรงทนทาน และสามารถรับส่วน ผสมแห้งที่จะอัดลงตัวได้ดี ควรทำการปรับแต่งระดับอย่างต่อเนื่องใน ครั้งเดียว เมื่อได้ความหนาที่ต้องการให้ทำการวางแผ่นฐานลงบนผิวของ Sika® Padding Mortar เพื่อให้ค่าการยึดเกาะที่ดีแนะนำให้ทำการวาง แผ่นฐานในขณะที่ผิวหน้าของ Sika® Padding Mortar มีลักษณะ ชื้นเหนียว หรือทำการพรมน้ำให้ทั่วใต้แผ่นฐานรองรับของเครื่องจักร ก่อนวางลงบนผิวหน้า Sika® Padding Mortarวิธีการบ่ม : ทำการบ่มผิวตามความเหมาะสมด้วยน้ำ กระสอบป่านชุบน้ำ หรืออาจ บ่มด้วยน้ำยาบ่ม Antisol® E (แอนติโซล อี)

Sika® Padding MortarDry Pack MortarA premixed cementitious mortar designed to give a dry pack mix consistency for a specialist application in levelling of machine beds prior to grouting.
- Easy to use : Requires only the addition of water
- Rapid strength gain : Facilitates quick installation and early operation of plant
- Reliability : Pre bagged material eliminates the site produced mortar variations
Usage Can use as general repair product such as infilling of recess, small homeycombs and minor damages. Advantages
- Easy to use : Requires only the addition of water
- Rapid strength gain : Facilitates quick installation and early operation of plant
- Reliability : Pre bagged material eliminates the site produced mortar variations
- Chloride free : Composition allows high early strength development with out the use of chloride
- Non Shrink : No loss of bond or surface contact
Packaging 25 kg/bagColour : Grey PowderProduct Information Shelf life : 6 months from the date of production If stored properly in undamaged, original, sealed packaging.Storage conditions : Store in dry conditions.Density : 2.00 kg/LTechnical Information Compressive Strength
Time
|
Compressive Strength (N/mm2) |
6 hrs. |
7 |
10 hrs. |
25 |
12 hrs. |
30 |
1 day |
40 |
3 days |
55 |
28 days |
70 |
APPLICATION INSTRUCTIONSMIXING : Quantity of water required 2.5 - 2.75 Litres per 25 kg. The selected water content should be accurately measured. Slowly add the total content of Padding mortar and mix till the required consistency is achieved. For best results a mechanically powered mortar mixer should be used.APPLICATION : Formwork constructed must be tight and able to contain the dry mix consistency of the padding mortar.The compaction must be continuous so that the padding mortar surface is plastic. When the required height or the padding mortar is reached, place the liner plate onto the mortar surface. Good bond between the underside of the plate and the mortar surface can be achieved if the mortar surface is plastic or wet the underside of the plate before lowering it onto the mortar surface.CURING TREATMENT : All exposed portion of the pad is to be properly cured by means of water application, wet hessian or Sika curing membrane.