Dr. Fixit Fastflex
Dr. Fixit Fastflex is a proprietary polymer-modified cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready mix kits (2 parts) When the dry part is mixed with proprietary acrylic-modified emulsion and applied according to direction, the curedDr. Fixit Fastflex will become a tough, flexible and seamless waterproof membrane and acts as an excel end water barrier to Concrete and Masonry Surface.
Area of Application :
- Concrete foundations, basements wall and lift pits.
- Swimming pools, water tanks and reservoirs.
- Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters.
- Any other concrete, cement or masonry surface subject to damage from moisture.
Method of Application1. Surface Preparation
- Allow new concrete and masonry substrate to fully cure prior applixation.
- All surfaces must be free from oil, grease, wax, dirt or any other form of foreign matter which might effect adhesion.
- Spalled Concrete must be sound before applied
- Substrate should be reach a "Saturated Surface Dry" (SSD) condition (damp, without standing water)
2. Mixing
- Use Portland cement mechanical mixer at slow speed; add product powder part to liquid part in a clean container until a smooth and homogenous slurry mixture is achieved.
- Allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior to application.
- Mixing material must be use within recommend pot life.
3. Applications
- Can be applied by brush and water brush or trowel. Do NOT dilute with water. Recommend Coverage rete is approximately 1.1 kg/m/coat for 1 mm. (Minimum 2 coat.)
- Allow the slurry tocure for at least 1 hour but no longer than 8 hours. before applying second coat. Do not leave the first coat to dry longer than 8 hours.
- For tile adhesive application on surface allow surface to cure for 3 days prior. If first coat was cure over 8 hours, fix by applying 2 to 3 coats of Dr.Fixit Pidifin 2k for desire waterproof surface thickness or fix by applying Dr.Fixit Fevimate XL tile adhesive to act top coat protection for Dr.Fixit Fastflex.
4. Curing
- For maximum protection, allow 12 to 24 hours curing time after second coat .
- Leave Dr. Fixit Fastflex at least 7 days to cure before filling or sealing water to test leaks.
*** High Quality Polymer Modified Flexible Cementitious Waterproofing Membrane
PACKING |
: 48 kg. |
CATEGORY |
: Waterproofing |