DR. Fixit Bentonite Waterstop
ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต็อป
( DR. Fixit Bentonite Waterstop )ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต็อป
ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต็อป เป็นวัสดุกันซึมสำหรับรอยต่อคอนกรีต เพื่อป้องกันการซึมผ่านของน้ำ ผลิตจากเบนโทนไนท์ คุณภาพสูง บวมตัวได้ดีเมื่อสัมผัสกับน้ำ ทำหน้าที่ปิดช่องว่าง และรอยแตก ภายในรอยต่อคอนกรีตซึ่งทำให้น้ำไม่สามารถไหลผ่านรอยต่อคอนกรีตได้
ลักษณะการใช้งาน :
- แผ่นพื้นคอนกรีต
- ถังน้ำ สระว่ายน้ำ บ่อพัก
- ถังบำบัดน้ำเสีย
- โครงสร้าง ทั้งใต้ดิน และเหนือดิน
- รอยต่อการก่อสร้าง
- อุโมงค์ เขื่อนคอนกรีต
- ท่อคอนกรีต
- คล่องส่งน้ำ ท่อลอดใต้ถนน
- คอนกรีตหล่อสำเร็จ
วิธีการใช้งาน1. การเตรียมพื้นผิว พื้นผิวต้องสะอาดและแห้ง ปราศจากสิ่งสกปรก เศษหิน คราบสนิม ฝุ่นผง2. การรองพื้น สำหรับการใช้งานปกติ ไม่จำเป็นต้องใช้น้ำยารองพื้น3. การทำงาน ไม่ควรติดตั้งขณะมีน้ำขัง4. ควรติดตั้ง ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต็อป กึ่งกลางระหว่างร่องคอนกรีต ระยะห่างจากคอนกรีต อย่างน้อยข้างละ 75 มม. จากนั้นลอกแผ่นปิดออกและกด ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต็อป ให้แน่น ตามแนวทีมีการเตรียมพื้นผิวไว้แล้ว5. การติดตั้งแนวดิ่งและแนวเหนือหัว ควรกดไว้อย่างน้อย 15 วินาที เพื่อให้ยืดเกาะกับพื้นผิวได้ดี รอยต่อ ระหว่าง ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต็อป6. การติดตั้งให้ต่อเนื่องตลอดเส้น ให้ต่อด้วยการต่อชน เพื่อลดรอยต่อ และข้อผิดพลาดที่อาจเกิดชื้น ในบางกรณี สามารถยืด ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต๊อป ด้วยตะปูเป็นช่วงๆคำเตือนและข้อจำกัด
- ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต๊อป ไม่สามารถใช้กับรอยต่อเพื่อการขยายตัวได้
- ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต๊อป ออกแบบให้ใช้สำหรับรอยต่อที่ไม่มีการเคลื่อนตัวเท่านั้น
- ไม่ควรทำการดึงหรือยืด ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต๊อป เพื่อเพิ่มความยาวมากกว่าปกติ ซึ่งจะลดความสามารถในการป้องกันการซึมผ่านห้องน้ำ
- ภายหลังการติดตั้ง ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต๊อป ควรทำการเทคอนกรีด ทันทีที่สามารถทำการเทคอนกรีตได้ เพื่อให้ประสิทธิภาพในการป้องกันการซึมผ่านของน้ำสูงสุด ควรป้องกัน ฝุ่น สิ่งสกปรก ทีผิวและป้องกันการสัมผัสน้ำ หรือฝนก่อนการเทคอนกรีต เพื่อไม่ให้ ดร.ฟิคสิท เบนโทไนท์ วอเตอร์สต๊อป บวมตัวก่อนการเทคอนกรีต
- ไม่ควรใช้ในพื้นที่ที่สัมผัสกับสารเคมีเข้มข้น
- ห้ามต่อด้วยการต่อทาบ
*** แผ่นกันน้ำระหว่างรอยต่อคอนกรีต ชนิดบวมน้ำ
ขนาดบรรจุ |
: 20 x 25 มม. ยาว 5 เมตร
|
|
: 20 x 15 มม. ยาว 5 เมตร |
สี |
: ดำ |
หมวดหมู่ |
: จำหน่าย น้ำยากันซึม - ราคาน้ำยากันซึม ซื้อน้ำยากันซึม |
ความปลอดภัยในการใช้งาน
- สินค้าไม่ติดไฟ
- หากสัมผัสดวงตา ให้ล้างด้วยน้ำอุ่นอย่างน้อย 15 นาที และไปพบแพทย์
- หากสัมผัสผิวหนัง ให้ล้างด้วยสบู่และน้ำสะอาด
- หากกินหรือกลืน ห้ามทำให้อาเจียร ให้รีบไปพบแพทย์
- ภายหลังการทำงานควรล้างมือด้วยสบู่น้ำสะอาด
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***
*** สามารถติดต่อสอบถาม 083-236-9493 หรือ LINE : @idh4523c ***
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c 

( DR. Fixit Bentonite Waterstop )
Description :
Dr. Fixit Bentonite Water stop is a bentonite based water stop designed to stop water infiltration through cast in place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. Dr. Fixit Bentonite Water stop provides superior expansion to seal and fill voids and cracks in the concrete.
Area of Application :
- Concrete Floor Slabs in Large Structures.
- Water tanks, swimming pools and sump tanks.
- Water treatment plants and sewerage treatment plants.
- Basement and Underground structure
- Construction Joint
- Tunnels and Dams.
- Around puddle flanges and Pipe penetrations.
- Box culverts and concrete irrigation channels
- Application on Concrete Pipe, Manholes, and Precast Box Sections.
Method of Application1. Surface Preparation
- Surfaes should be clean and dry. Remove all dirt, rocks, rust or other construction debris.
2. Priming
- Primer is not required in general application.
3. Installations
- Do not install Dr.Fixit Bentonite Water Stop in standing water.
- Dr.Fixit Bentonite Water Stop require minimum 75 mm. of concrete coverage
- Remove release paper and then flrmly press the entire length of Dr.Fixit Bentonite Water Stop on to the prepared surface.
- For vertical and overhead application, firmly press a minimum of 15 seconds to assure adhesion
- Joint between Dr.Fixit Bentonite Water Stop Tightly butt coil ends together to form a continuous
- Water stop- Do not overlap coil ends. Place in maximum practical lengths to minimize coll end joints.
- In some case "Nail" can be use to fix Dr.Fixit Bentonite Water Stop in position.
Precautions & Limitatoons
- Donot use Dr.Fixit Bentonite Waterstop in an expasion joint Dr.Fixit Bentonite Waterstop is designed to be used only in NON MOVING CONSTRUCTION JOINTS.
- Do not stretch or pull the Dr.Fixit Bentonite Waterstop and make it longer then its existing length
- If you do this, then the effectiveness of Dr.Fixit Bentonite Waterstop will reduce drastically and it will not be able to seal the joint properly.
- After laying Dr. Fixit Bentonite Water stop, concreting is to be done as early as possible for maximum
- Effectiveness. No dust or debris should fall on the water bar. Rain or curing water will start the special swelling process of Dr.Fixit Bentonite Water stop. Hence concreting should be carried out as early as possible.
- Do not use as a primary joint waterstop for concentrate chemical containment vassels.
- Do not overlap coll ends.
*** Bentonite Base Hydrophilic Water Stop
PACKING |
: 20 x 25 m. Lenght 5 M. |
|
: 20 x 15 m. Lenght 5 M. |
COLOR |
: Black
|
CATEGORY |
: Waterproofing |
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***
*** สามารถติดต่อสอบถาม 083-236-9493 หรือ LINE : @idh4523c ***
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c