ดร.ฟิคสิท เซลฟ์ แอดฮีซิฟ 1.5 มม.
Dr. Fixit Self Adhesive 1.5 mm
( Dr. Fixit Self Adhesive 1.5 mm )
ดร.ฟิคสิท เซลฟ์ แอดฮีซิฟ 1.5 มม.
ดร.ฟิคสิท เซลฟ์ แอดฮีซิฟ เป็นแผ่นเมมเบรนบิทูเมนมอดิฟายด์ด้วย เอสบีเอส สำหรับกันรั่วซึมชนิดเย็นมีกาวในตัว เสริมแรงด้วยผ้าตาข่ายโพลิเอสเตอร์ ด้านที่เป็นกาวมีกระดาษซิลิโคนปกปิดไว้ป้องกันกาวเสื่อมตลอดอายุการเก็บรักษา วัสดุนี้ให้การยึดเกาะพื้นผิวที่ดีเยี่ยมตลอดทั้งขอบที่ซ้อนทับกันและตลอดอายุการใช้งาน
มาตรฐานที่ใช้ในการทดสอบ : ASTM D 1000, ASTM D 1004
ลักษณะการใช้งาน :
- พื้นหลังคา
- กระถางต้นไม้และสวน
- ชั้นใต้ดินและฐานรากโครงสร้าง
- อ่างน้ำและแท็งค์น้ำ
- อุโมงค์และสะพาน
คุณสมบัติ :
- ติดตั้งง่าย โดยไม่ต้องใช้ความร้อน
- การยึดเกาะที่ดีเยี่ยมกับพื้นผิวคอนกรีตที่ทารองพื้นด้วยไพร์เมอร์แล้ว
- สามารถตรวจสอบความหนาของแผ่นเมมเบรนได้ตลอดทั้งผืน
- ใช้งานง่ายติดตั้งได้อย่างรวดเร็ว
- มียาง เอสบีเอส เป็นปิดผนึกด้วยตนเองป้องกันรูรั่วเล็กๆ น้อยๆ
วิธีการใช้งาน :
การเตรียมพื้นผิว
- พื้นผิวต้องมีความแข็งแรง สะอาด แห้ง ปราศจากสิ่งสกปรก น้ำมัน จารบี และพื้นผิวต้องเรียบสม่ำเสมอ
- สำหรับพื้นผิวคอนกรีตใหม่ต้องรอให้บ่มตัวเป็นเวลา 21 วัน
การรองพื้น
- รองพื้นด้วย ดร.ฟิคสิท ไพร์เมอร์ เอส หนึ่งเที่ยวด้วยอัตรา 0.15 - 0.25 ลิตร/ตร.ม.
การทำงาน
- คลี่ม้วน ดร.ฟิคสิท เซลฟ์ แอดฮีซิฟ ลงบนพื้นผิวที่รองพื้นด้วย ดร.ฟิคสิท ไพร์เมอร์ เอส แล้วตั้งม้วน ดร.ฟิคสิท เซลฟ์ แอดฮีซิฟ ให้ตรงกับแนวที่จะปูแล้วม้วนกลับในแนวก่อนปู ให้ขอบซ้อนกันอย่างน้อย 100 มม.ปลายทับซ้อนอย่างน้อย 150 มม.
- ดร.ฟิคสิท เซลฟ์ แอดฮีซิฟ ควรจะนำไปใช้ปูพื้นผวทันทีหลังจากแกะกระดาษซิลิโคนออกแล้วกดรีดแผ่นเมมเบรนให้ยึดติดแน่นกับพื้นผิวโดยไม่ให้มีฟองอากาศ
- รอบรอยต่อและรอบตอม่อ รางระบายน้ำ ฯลฯ ควรจะปิดผนึกด้วยวัสดุยาแนวที่เหมาะสมเพื่อป้องกันการรั่วซึม
*** แผ่นเมมเบรนมอดิฟายด์บิทูเมนกันรั่วซึม ชนิดเป็นแทปกาวในตัว
ขนาดบรรจุ |
: หนา 1.5 มม. x กว้าง 1 เมตร x ยาว 20 เมตร
|
สี |
: น้ำตาล, ขาว |
หมวดหมู่ |
: จำหน่าย น้ำยากันซึม - ราคาน้ำยากันซึม ซื้อน้ำยากันซึม |
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***
*** สามารถติดต่อสอบถาม 083-236-9493 หรือ LINE : @idh4523c ***
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c 

( Dr. Fixit Self Adhesive 1.5 mm )
Description :
Dr. Fixit Self Adhesive is a cold applied, elastomeric SBS modified bituminous waterproofing membranes, reinforced with a non woven polyester mat. With PE finish. Under side surface is the high quality easily removable release paper, which protects the adhesive side of the membrane during storage. A selvage provides excellent adhesion at overlaps and ensures the continuity of the waterproofing membrane system.
Specification :
- Self Adhesive HDPE Surface : ASTM D 1000 , ASTM D 1004
Area of Application :
- Roof Slab
- Planter Boxes and Landscape Decks
- Basement and below ground Structure
- Viaducts and tanks pools
- Tunnels and bridge decks
Features & Benefits
- Cold applied, safety application
- Excellence adhesion to primed concrete substrates
- Ensure uniform thickness of waterproofing membrane, avoids the "thin spots"
- Easy to applied, Fast application
- SBS rubberized compounded is self-protected and self-sealing to minor punctures.
Method of Application1. Surface preparation
- Concrete substrate where the membranes are to be applied should be free from voids, dirt, grease. loose or coarse aggretes, and sharp protrusions.
- New concrete shall be water cured. wood float finished. and be a minimum of 21 day old
2. PRIMER
- Porous substrate such as concrete or brick should then be treated with Dr. Fixit Primer S at coverage rate of 0.15 - 0.25 ltr/m depending on porosity and allow to dry before application. Metal surfaes do not required any priming.
3. Application
- Unroll the Dr.Fixit Self Adhesive Roll after application of primer
- Align the Dr.Fixit Self Adhesive Roll correctly & re-roll it in alignment before applied
- Allow a minimum 100 mm. overlap at the edge of the membrane and 150 mm. overlap at the ends.
- Dr. Fixit Self Adhesive should be applied to the substrate immediately after removed the silicone continuously to the substrate without air pockets
- All angles & abutments upstands should be sealed with extra care to ensure perfact bondage. Seal the edges well into grooves & protect with a suitable sealing product
4. Cleaning
- Tools and equipment's should be cleaned after application
*** Cold Applied, Self – Adhesive with PE finish waterproofing membrane
PACKING |
: Thickness 1.5 MM x Width 1 M x Lenght 20 M |
COLOR |
: Brown, White
|
CATEGORY |
: Waterproofing |
*** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***
*** สามารถติดต่อสอบถาม 083-236-9493 หรือ LINE : @idh4523c ***
ราคาขึ้นอยู่กับจำนวนและโปรโมชั่น โปรดเลือกที่ต้องการ ได้ที่ กด ติดต่อสอบถามราคา 083-236-9493 หรือ LINE : @idh4523c