จระเข้ ฟลอร์ ฮาร์ดเดนเนอร์
Crocodile Floor Hardener
จระเข้ ฟลอร์ ฮาร์ดเดนเนอร์Crocodile Floor Hardener
- ปูนฟลอร์ ฮาร์ดเดนเนอร์ใช้ง่าย แค่โรยบนพื้นคอนกรีต
- สร้างความแข็งแกร่งให้กับพื้น ทนทานเพิ่มอายุการใช้งาน
- ไม่ผสมโลหะ ไม่ขึ้นสนิม และสามารถใช้ได้ดีแม้ในบริเวณที่เปียกชื้น
- รับน้ำหนักได้สูง ไม่เป็นฝุ่น
- ทนต่อแรงเสียดสีมากกว่าคอนกรีตทั่วไปถึง 300%
- ทำให้พื้นผิวเรียบและมีความหนาแน่นมากขึ้น จึงสามารถป้องกันการซึมผ่านของน้ำมันเชื้อเพลิงและน้ำมันหล่อลื่น
- ทำความสะอาดง่าย และไม่สึกหรอเมื่อใช้เครื่องทำความสะอาดขัดถู
ลักษณะการใช้งานจระเข้ ฟลอร์ ฮาร์ดเดนเนอร์ เหมาะสำหรับงานพื้นโรงงาน โกดัง ลานจอดรถ ลานคอนกรีต ช่วยทำให้พื้นผิวคอนกรีตแกร่งขึ้น และมีอายุการใช้งานที่ยาวนานขึ้นสีของผลิตภัณฑ์ : สีเทา สีเขียว สีเขียวอ่อน สีเขียวพรมศิลา สีน้ำตาลขนาดบรรจุ : 20 กก. / ถุงข้อมูลสินค้าจระเข้ ฟลอร์ ฮาร์ดเดนเนอร์ (Floor Hardener) เป็นผลิตภัณฑ์สำเร็จรูป มีส่วนประกอบของ ควอทซ์-ซิลิก้า (Quartz-Silica) ปูนซีเมนต์ปอร์ตแลนด์ สารกักกระจายฟองอากาศและสารลดน้ำ ซึ่งทำให้ได้ผิวหน้าคอนกรีตแข็งแรง และทนแรงขูดขีดได้มากกว่าพื้นคอนกรีตที่ไม่ได้เคลือบถึง 300% ใช้สำหรับเคลือบผิวคอนกรีตใหม่เพื่อทำให้พื้นผิวคอนกรีตแกร่งขึ้น มีอายุการใช้งานที่ยาวนานและพื้นคอนกรีตสามารถรับน้ำหนักได้ดีขึ้น ทนแรงขัดสีได้ดีแก้ปัญหาฝุ่นที่ผิวหน้าคอนกรีต
การเตรียมพื้นผิว
- ทำความสะอาดพื้นผิวที่จะทำการเคลือบผิวให้ปราศจาก ฝุ่น เศษปูน หรือ สิ่งแปลกปลอมอื่นๆ บนพื้นผิว
- จัดเตรียม จระเข้ ฟลอร์ ฮาร์ดเดนเนอร์ ให้เพียงพอกับความต้องการที่จะใช้
- กรณีคอนกรีตที่เทใหม่ เมื่อเทคอนกรีตเรียบร้อยแล้วให้รอจนกระทั่งคอนกรีตเริ่มก่อตัวและมีน้ำเยิ้ม (Bleeding) บนผิวหน้าคอนกรีต ให้กวาดน้ำที่เยิ้มทิ้ง ห้ามโรยจระเข้ ฟลอร์ ฮาร์ดเดนเนอร์ ในขณะที่มีน้ำเยิ้มบนผิวคอนกรีตอย่างเด็ดขาด
การใช้งาน
- โรยจระเข้ ฟลอร์ ฮาร์เดนเนอร์ โดยใช้ตะแกรงร่อนลงให้เต็มเนื้อที่หรือใช้มือโรยบนผิวคอนกรีตในจำนวน 2/3 ของปริมาณที่จะใช้
- ทิ้งไว้ให้จระเข้ ฟลอร์ ฮาร์เดนเนอร์ ได้รับความชื้นจากผิวคอนกรีตอย่างทั่วถึง
- หลังจาก จระเข้ ฟลอร์ ฮาร์เดนเนอร์ มีสีคล้ำลงเพราะได้รับความชื้นโดยตลอดแล้วจึงใช้เครื่องขัดและโรยส่วนที่เหลือ 1/3 ลงไป และทิ้งไว้ให้ได้รับความชื้นอย่างทั่วถึงเหมือนกับตอนแรกแล้วจึงทำการขัดอีกครั้ง
- สำหรับส่วนมุมของพื้นควรใช้เกรียงไม้แต่ง และขัดให้เรียบร้อยเมื่อใช้เครื่องขัดจะต้องแน่ใจว่าพื้นคอนกรีตที่ทำการขัดนั้นแข็งแรงพอที่จะสามารถรับน้ำหนักของช่างและเครื่องมือได้

Crocodile Floor Hardener
- Provides greatly improved floor life and long-term performance
- Provides, non-dusting, spall-resistant surface
- Finished surface is uniform and doesn't need to be painted.
- Smooth, dense surface resists penetration of grease and oil.
- Produces an easy-to-clean, low-maintenance floor which is resistant to most cleaners and surface scouring
Color : Grey, Light Green, Green, Dark Green, BrownPacking : Net weight : 20 kg/bagInformationCrocodile Floor Hardener is a high-quality blend of carefully graded quartz-silica aggregate, selected Portland cement and special dispersing and water-reducing agents. Crocodile Floor Hardener is a ready-to-use surface treatment for new concrete which imparts greater durability and longer service life to high-traffic concrete floors. The quartz-silica aggregate is naturally compatible with concrete and provides a very hard, dense, abrasion-resistant surface. It has proven to produce 300% greater abrasion resistance than untreated concrete slabs.
Application Instruction
Substrate PreparationThe concrete should be allowed to stand after screeding and bull floating. This will give the bleed water time to come to the surface. The bleed water can be removed with a rubber hose by dragging it in a loop across the concrete surface or by allowing it to evaporate. Do not apply floor hardener into bleed water. If a harsh or low slump concrete mix is used do not delay application of floor hardener. Float the concrete immediately prior to floor hardener application to open the surface. Use a wood float or wood bull float for this.
ApplicationThe floor hardener should be applied in two steps, often referred to as "shakes". Use a mechanical spreader or broadcast by hand approximately 2/3 of the required floor hardener evenly over the concrete surface. Allow the floor hardener to absorb available moisture until it wets out thoroughly. After the floor hardener darkens uniformly it should be floated into the concrete surface with a wood hand or bull float. Apply the remaining of the floor hardener in a similar manner except at right angles to the first shake. Again allow the floor hardener to wet out thoroughly and then float it in using a wood hand or bull float. Avoid overworking the surface at this point to keep the floor hardener at the surface. Float the edges by hand using a wood hand float. A power float can also be used to float the floor hardener into the concrete surface; however, it is necessary to delay application until the concrete can support the power float and the operator.