Dr. Fixit Con Joint is a hot poured joint sealant. It is composed of special type of synthetic rubber, asphalt, resin, chemical additive and filler, it has excellent properties to prevent the passage of moisture down to the joint, high elasticity, adheres firmly and will not lose bond even if it is immersed in water for long time.
Dr. Fixit Con Joint is for horizontal joint using heat to melt into liquid to pour temperature which will effectively bond to the concrete. Dr.Fixit Con Joint has low pour temperature containing no solvent making it highly save and saves melting time.
Features & Benefits
Easy application
Elastomeric
Excellent Adhesion
Good resistance to hot weather and sunlight
Area of Application Seal horizontal joint of
Concrete road.
Bridge.
Dam.
Concrete floor joint of concrete slab etc.
Method of Application 1. SURFACE PREPARATION:
The joint must be clean, dry and free of dirt, dust or other loose materials.
2. PRIMING
to ensure good adhesion of sealant, application of Dr. Fixit Primer J is recommended
3. APPLICATIONS
Melt Dr.Fixit CONJOINT together with the wrapped plastic in oil-jacketed melted.
Control temperature of heat transfer oil not higher than 240 °C and sealant not higher the 180 °C
Stir sealant homogeneously until thoroughly melted.
Pour melted sealant into prepared joints.
the melted sealant should be used all in 2-3 hrs.
Allow the poured sealant to dry and settle for 4-5 hrs. Before opening traffic
4. CLEANING
Tools and equlpment's should be cleaned immediately with kerosene or mineral turpentine.
Sholf Life & Storage
Maximum 1 year in sealed container kept under shed area
Kealth & Safety Precaution
In case of fire use dry chemical or carbon dioxide orsand. Do not use water.
If molten material comes onto contact with the skin, immerse the injured part under running cold water, and obtain medical advice immediately.
do not allow water to come into contact with molten material. This may cause it to boil over